Контактна інформація

Шукач вказав телефон, ел. пошту та LinkedIn.

Отримати контакти цього кандидата можна на сторінці https://www.work.ua/resumes/5150470

Досвід роботи

Mechanical desinger

з 10.2012 по нині (11 років 6 місяців)
ETALON, Львів (vehicles)

Creating 3D models of parts and components of buses, trolleybuses and trams. Creating layouts of units and aggregates. Creating drawings. Creating descriptions and presentations. Strength calculation (FEA analysis). Tolerance stack-up analysis. Kinematic analysis of units. Production support. Study of similar products. Work in Part, Sheet Metal, Surface, Drawing, Assembly. Working here I achieved significant experience in creating parts of complex configurations of sheet metal. I created simpler and more efficient design of floor covering for some buses.

Design engineer

з 10.2009 по 10.2012 (3 роки)
IMVO, Львів (racks)

Creating 3D models of parts and components of racks. Creating layouts of units and aggregates. Creating drawings. Creating descriptions and presentations. Kinematic analysis of units. Production support. Study of similar products. Packaging for different parts of racks. Worked in Part, Sheet Metal, Surface, Drawing, Assembly. I took part in the development of warehouse safety products, mezzanines and bar racks. I contributed significantly in designing roller racks and bar racks that were new products for the company, created effective and efficient rack protectors.

CNC-operator

з 07.2009 по 10.2009 (3 місяці)
Claesson Engineering Ukraine LLC, Львів (Construction, architecture, interior design)

I worked with HAAS’ computer numerically controlled machines. I worked with a milling machine and a lathe

Design engineer

з 10.2008 по 01.2009 (3 місяці)
Bogdan Motors, Львів (automotive)

Creating 3D models of parts and components of the trolleybus T80110. Creating drawings. Creating descriptions and presentations. Studied PTC Creo Parametric.

Design engineer

з 03.2007 по 10.2008 (1 рік 7 місяців)
LAZ, Львів (automotive)

Creating 3D models of parts and components of buses and trolleybuses. Creating layouts of units and aggregates. Creating drawings. Creating descriptions and presentations. Production support. Study of similar products. Work in Part, Sheet Metal, Surface, Drawing, Assembly.

Освіта

« Lviv Polytechnic » National University.

Vehicles and Vehicle Fleet, Львів
Вища, з 2000 по 2006 (6 років)

I graduated from «Lviv Polytechnic» National University. I obtained basic higher education majoring in «Vehicles and Vehicle Fleet» and obtained the qualification of Bachelor of Engineering Mechanics.
I obtained complete higher education majoring in «Vehicles and Vehicle Fleet» and obtained the qualification of Master of Engineering Mechanics, graduating in 2006 from «Lviv Polytechnic» National University.

Додаткова освіта та сертифікати

Americal English Center

1 рік

Goethe-Institut

2018-2020

Знання і навички

Знання мов

• Англійська — просунутий
• Російська — вільно
• Українська — вільно
• Німецька — середній

Додаткова інформація

Volodymyr Yehis
Phone: [відкрити контакти](див. вище в блоці «контактна інформація»)
E-mail: [відкрити контакти](див. вище в блоці «контактна інформація»).
[відкрити контакти](див. вище в блоці «контактна інформація»)

Design engineer, 37 years old, was born in March 1983. Live in Ukraine, Lviv, unmarried.
I have been working at «ETALON» Corporation since October 2012. I have been working in the bus body department. I have been taking part in the development and execution of drawings of side walls, basements, plywood floors and floor coverings for different models of busses, making 3-D models as well as drawings. I did some static analysis in FEA simulation for different frames. I worked with tubular materials, sheet metal, plywood, floor covering. Working here I achieved significant experience in creating parts of complex configurations of sheet metal. I’ve created simpler and more efficient design of floor covering for some buses.
I worked at «IMVO» Company from October 2009 to October 2012. I worked in the development department of racking. I took part in the development of warehouse safety products, mezzanines and bar racks. Worked with tubular materials, sheet metal, channel bars, hot-rolled steel angles. I made packaging for different parts of racks. I contributed significantly in designing roller racks and bar racks that were new products for the company, created effective and efficient rack protectors.
I worked at “Claesson Engineering Ukraine LLC” from July 2009 to October 2009. I worked with HAAS’ computer numerically controlled machines. I worked with a milling machine and a lathe.
I worked at “Lutsk automobile factory” (Bogdan Motors) from October 2008 to December 2008. I worked in the bus body department. I took part in the development and execution of drawings of side walls of a trolley T901. Worked with tubular materials. I was laid off in December 2008 because of the crisis.
I worked at “LAZ” (Lviv Automobile Factory) from March 2007 to October 2008. I worked in the design department in the bus body department. I took part in the development and execution of drawings of internal lining of busses with sheet metal.
I graduated from « Lviv Polytechnic » National University. I obtained basic higher education majoring in «Vehicles and Vehicle Fleet» and obtained the qualification of Bachelor of Engineering Mechanics.
I obtained complete higher education majoring in «Vehicles and Vehicle Fleet» and obtained the qualification of Master of Engineering Mechanics, graduating in 2006 from « Lviv Polytechnic » National University.
I worked with AutoCAD 2D, KOMPAS, SolidWorks, Zenit-95, CorelDraw, Microsoft Office Excel, Microsoft Office Word. CATIA V5.
Knowledge of languages: English – studied in American English Center http://americanenglish.ua/ua , finished advanced level, Ukrainian – advanced, Russian – advanced. German – studying B2, in 2019 passed German B1 exam at the Ivan Franko National University of Lviv that is affiliated with Goethe-Institut.