Контактна інформація

Шукач вказав ел. пошту та адресу.

Отримати контакти цього кандидата можна на сторінці https://www.work.ua/resumes/669726

Досвід роботи

Design engineer

з 08.2020 по нині (3 роки 8 місяців)
GTG Gebläsetechnik GmbH, A-1230 Wien (production)

Design of 3D centrifugal fans + design documentation.
Creation of lists of parts and purchased items.
Dynamic calculations of the rotor group, strength calculations, etc.

Mounter

з 01.2020 по 06.2020 (5 місяців)
Arbeitsplatzergonomie VAUPEL, Bad Fallingbostel, 29683 (installation of industrial ventilation systems)

- Installation of air purification systems at the customer's site. Installation of air ducts in welding and production shops. The diameter of the spiral wound pipes is from 100 to 800 mm.
- Ability to work in a team and with a hand-held power tool.
- Service work with filter air purification systems.
www.vaupel-info.de

Design engineer

з 09.2016 по 03.2019 (2 роки 6 місяців)
LLC "Kiev ventilation plant", Kiev, Киев (production)

- Development of axial and radial fans. 3D and design documentation.
- Development of smoke exhausters with air temperatures from 250 degrees to 400 degrees
- Development of fans for the subway.
- Strength calculation in Ansys (FEM, FluidFlow CFX, Fluent, Static Structural, Modal)
Autodesk Inventor 2016 Pro - Excellent
https://ventilator.ua/

Design engineer

з 05.2015 по 06.2016 (1 рік 1 місяць)
aton-service, Ukraine, Kiev (production)

- Development and calculation of the strength of silos for storing wood chips.
- Development of 3D and drawings aspiration system.
- Development of 3D drawings and bunkers with "walking floor" system, the calculation of screw conveyors for wood sawdust.
- calculation of the strength in Ansys
SolidWorks – perfectly

Design engineer

з 03.2015 по 05.2016 (1 рік 2 місяці)
«Technokomplekt» LLC, Ukraine, Kiev (research, production)

Design Engineer
Design drawings and 3D systems pneumatic technological raw materials, screw conveyors, shredders technological raw materials, magnetic separator, vibrating table, cyclone system and a diffraction system "Coande" and others.
(SolidWorks)

Calculations treatment systems and the efficiency of operation of cyclones, working grinder and a diffraction system "Coande" for 1000mkm from 0.1 micron particle size. (Ansys 15)

Desing engineer

з 09.2014 по 09.2015 (1 рік)
Corum grp, kiev (production)

- Development of design documentation
- The creation of 3D models of mine fans of local and general ventilation;
- Improvement of existing designs mine radial fans.

Design engineer

з 07.2010 по 08.2014 (4 роки 1 місяць)
Scientific and Production Association Donventilyator Ltd. (production)

- Development of design documentation
- The creation of 3D models of mine fans of local and general ventilation;
- Improvement of existing designs mine fans, populated,, conductors and others. Designing molds for casting aluminum and plastic, with a simple filling and through a siphon system. Designing die blanks, process technology and maps sketches of its processing; Disposition of the shop and putting film-vacuum forming, etc..
- Aerodynamic testing of new developments;
- Calculation of strength, stability, vibration
- Shef-installation of equipment on the territory of Ukraine, and Uzbekistan.

An economist of the division provision

з 01.2010 по 02.2010 (1 місяць)
Plant CokeChemistEquipment, Donetsk (production)

- a provision of need of the enterprise in broad spectrum goods and services
- a conclusion of the contracts with sellers, registration transport document, monitoring the deliveries
- business management of financial reporting for period

manager

з 11.2006 по 12.2009 (3 роки 1 місяць)
Analyst Centre, Donetsk (selling the labware)

Duties:
- dialoguing negotiations with chief of the laboratory enterprise cement, refractory and metallurgical industry;
- a decision of the problem of engineering and choice to optimum deskside of the equipment;
- a development of the agreements: on supply and buying the equipment, transport facilities, broker facilities;
- dialoguing negotiations about buying the equipment HERZOG (Germany), BAHR(Germany), HORIBA (representation in Cheches); Shimadzu (Russia) and others.
- has organized the cooperation with "Activator", Novosibirsk, Russia; "ASMA", Svetlovodsk, Ukraine; "Uralsibpromservis", Chelyabinsk, NVP "Centre CAD", Livov, Ukraine and others.
- has developed 2 presentation disk of the laboratory equipment;
- has prepared 3 reports on activity of the Assotiations "Systems of the supervision quality of" Ukraine

service engineer

з 11.2006 по 12.2009 (3 роки 1 місяць)
Anmat service, Donetsk (service of labware)

- repair, diagnostics of the laboratory equipment (the presses and mills HERZOG, dilatometre BAHR, gas-analyzer HORIBA), connection instrument,
- learning the work with equipment of the personnel of the laboratory,
- briefing on safety and others.

an assistent of the professor

з 10.2006 по 01.2007 (3 місяці)
DonNTU, Technology of machine building , Donetst (teaching activity)

- teaching activity - an Undertaking laboratory and practical work beside student 4 courses on course "bases to technologies of machine building".

Освіта

Donetsk National technical university

Post graduate student of machine building, Donetsk
Вища, з 2004 по 2007 (2 роки 11 місяців)

Courses taken include:
Theory of the machines and mechanism
Metalworking tool and industrial robots
Cutting instrument
Mechanical processing metacatch and alloy
Hydraulics and pneumatic
Forging and stamping
Metalworking tool and industrial robots
Cutting instrument
Magnetic and abrasive processing

ACTIVITIES/HONORS/AWARDS
- 6 research articles, of them 3 on pepper VAK Ukraine.
- 8 research conferences, of them 3 international.
- Has Prepared 8 presentations.

Знання і навички

Знання мов

• Німецька — вище середнього
• Англійська — середній

Додаткова інформація

SKILLS
- Languages: Russian, Ukrainian and English, Deutsch
- Experienced with Solid Works; Inventor
-User : ANSYS - CFX; FEA; Static Structural; Modal; FluidFlow.
-driver certificate: categories В;
-knowledge to technical documentation.