Oleksii

Контактная информация

Соискатель указал телефон, эл. почту, адрес и LinkedIn.

Получить контакты этого кандидата можно на странице https://www.work.ua/resumes/5772764

Опыт работы

Project Manager preventive quality planning

с 07.2019 по наст. время (4 года 9 месяцев)
Robert Bosch GmbH, Bühl (Automotive)

• Creation of preventive quality planning (PQP) and execution for purchased parts of different
material fields
• Process acceptance at the suppliers
• Planning and execution of initial samples releases of purchased parts
• Planning and implementation of ramp-up safeguards in the supply chain

Quality planning engineer APQP

с 01.2016 по 06.2019 (3 года 5 месяцев)
Swoboda KG, Wiggensbach (Automotive)

• Quality planning new projects (APQP)
• Creation of production control plans
• Planning and execution of component qualifications
• Planning and execution of incoming inspection of purchased parts
• Creation of quality instructions and failure catalogs
• Definition of test equipment and qualification (test equipment capability analysis)
• Creation and analyze of machine and process capability studies
• Coordination and cooperation in the preparation of D- and P-FMEA
• Coordination and cooperation in the preparation of dummy parts
• Evaluation of customer documents (drawings, specifications, ...) for the manufacturability
analysis
• Cooperation in project team
• Coordination of planning tasks within the quality departments
• Creation of the Q-documentation
• Responsible for parts and sampling documentation for the customer (PPAP, ISIR)
• Cooperation in internal process release
• Cooperation in process release by the customer and by suppliers
• Discussions with customers and suppliers
• Deadline monitoring internally and to the customer
• Project controlling of Q-topics
• Participation of first parts creation
• Support for foreign locations due to relocation projects
• Support for all locations of the company group on site

Team leader quality planning APQP

с 09.2014 по 12.2015 (1 год 3 месяца)
Leopold Kostal GmbH & Co. KG (Kostal Ukraine TOV), Переяслав-Хмельницький (Automotive)

• Personnel responsibility for a team of 2 employees
• Leadership and development of the team in the area of advanced quality planning
• Quality planning in the overall project phase up to the start of series production
• Ensuring the product and process quality until the product readiness for series production
• Support in the evaluation of specifications as well as in the acceptance and approval of
machinery and manufacturing facilities
• Analysis and preparation of quality data and process statistical reports in the product start-up
phase
• Contact person for complaints within the project phase
• Cooperation with relevant specialist departments

Quality planning engineer APQP/ Test engineer

с 02.2012 по 09.2014 (2 года 7 месяцев)
Leopold Kostal GmbH & Co. KG (Kostal Ukraine TOV), Переяслав-Хмельницький (Automotive)

• Quality responsibility for mechatronic products from development to series run and further
support in the series process
• Advanced quality planning for new projects, participation in the PEP team for APQP, PPAP, PFMEA
• Close cooperation with the team in Lüdenscheid (headquarters)
• Assist in the creation of manufacturability analyzes and checking customer requirements for
feasibility
• Responsible for the implementation of Q customer requirements and participation in customer
audits
• Assist with the introduction of lessons learned measures in the new project
• Definition of important process and product characteristics
• Planning of test equipment and concept development for gauges and measuring fixtures as well
as approval of the equipment
• Ppm-calculation for 0-km
• Create of production control plans and inspection instructions
• Accompanying process approvals (new tools / process / measuring equipment)
• Investigation and evaluation of the capabilities of measuring measuring systems and production
equipments and their release
• Evaluation of quality and process indicators and initiation of measures
• Demand of measures in case of target deviations and escalation
• Processing and documentation of complaints acc. to 8D in pre-production process
• Participate in the search for the causes of customer complaints in serial process
• Reviewing the FMEA and implementing preventive and detection measures to avoid a
recurrence of the complaint
• Review the effectiveness of corrective actions
• Training of employees in the sector of quality and measurement technology
• Perform internal 5S audits. Participation in process audit VDA 6.3 / ISO audits
• Planning, implementation and documentation of care and calibration of measurement fixtures
and measuring instruments
• Measurements using caliper, micrometer, profile projector, measuring microscope, indicator,
luminescence camera LMK 98-4, Fluke 5500A, HP 34401a, Thermologger 5000. Programming of
Zwick measuring machine (force and way)
• Creation and evaluation of the measurement reports

Образование

Technical university Ilmenau

Faculty of Computer Science and Automation, Engineering Informatics, Ilmenau
Высшее, с 2009 по 2010 (1 год)

Graduation: M.Sc. Engineering Informatics and Magister of Metrology

Nacionalnyj universytet “Lvivska politechnika”

Faculty of Computer Science and Measurement, Metrology and Measurement Technology, Львів
Высшее, с 2005 по 2009 (3 года 10 месяцев)

Graduation: Bachelor of Metrology

Знания и навыки

Знание языков

• Украинский — свободно
• Русский — свободно
• Немецкий — продвинутый
• Английский — выше среднего

Дополнительная информация

Quality tools: APQP, PPAP, FMEA, CP, PTC, SPC, measurement methods, 5S, MSA, 8D, Poka Yoke, Paretoanalyze, Ishikawa, 5-Why, ISO 9001 / 14001 / 18001 / IATF 16949