Contact information

This job seeker has hidden his personal information, but you can send him a message or suggest a job to him if you open his contact info.

Work experience

Department Maneger of Production

from 12.2020 to now (3 years 6 months)
Машинобудування

- Plans the production capacity (equipment, personnel) and schedules (incl. e.g. additional shifts) according to the requirements of the customer and S&OP planning. (Pre-production prototypes/ serial production / aftersales)
- Coordinates the optimal utilization of production equipment.
- Ensures On Time In Full production (Internal and external orders).
- Monitors the achievement of the daily, weekly and monthly targets according to schedule and prepares corrective action plans for non adherence.
- Prepares and monitors annual budgets (e.g.Head count / efficency etc) and instigates corrective actions for deviations.
- Analysis of the production results from the previous day (e.g. efficiency, quality, waste of products, rejects etc.) and identifies and introduces the necessary counter measures (e.g. KOSU, KATA) and/or ensures escalation.
- Works together with OPEX and supporting functions on improvement projects (QCD/ Lean/VSM etc)/Співпрацює з відділом OPEX та іншими відділами в проєктах покращення (QCD/Lean /VSM тощо)
- Checks the ergonomics of the workplaces and initiate required improvement measures.
- Organizes the workplaces to eliminate the waste on the shop floor using 5S Methodology.
- Ensures proper handling of components and material, optimizes the in-process material storage.
- Uses and applies the PDCA cycle in order to improve the processes and systems from the area of responsibility.
- Leads cross-functional and contributes to the continuous improvement process (CIP).
- Ensures compliance with all Legal and LEONI requirements in the areas of complainace, regulatory and SHE topics.
- Ensures and contributes to the customer satisfaction (Communication / support visits / audits / quality etc).
- Complies with deadlines and ensures compliance with all required KPI's and corrective actions for non achievement.
- Fulfills the quality requirements and applies quality tools (QRQC/Stop at first defect/ 8D etc).

Department Maneger of Prototype department on MAN project

from 04.2018 to 11.2020 (2 years 7 months)
ТзОВ''Леоні", Коломия (Машинобудування)

- Planing the production capacity (equipment, personnel) and schedules (incl. e.g. additional shifts) according to the requirements of the customer.
- Coordinating the optimal utilization of production equipment.
- Controling the achievement of the daily, weekly and monthly targets according to schedule.
- Analysing of the production results from the previous day (e.g. efficiency, quality, waste of products, rejects etc.) and identifies and introduces the necessary.
- Ensuring the continuous optimization and improvement of the production process within the area of responsibility.
- Checking the ergonomics of the workplaces and initiate required improvement measures.
- Organizing the workplaces to eliminate the waste on the shop floor using 5S Methodology.
- Ensuring proper handling of components and material, optimizing the in-process material storage.
- Using and applying the PDCA cycle in order to improve the processes and systems from the area of responsibility.
- Supporting Production Engineering.
- Cooperate with other departments within the area of responsibility.
- Planning, standardization and realization in department.
- Coordinate the planning and management of activities in order to ensure availability of production equipment.
- Integration of new processes in department.
- Elaboration, optimization and implementation of production process and standards.
- Development and implementation of standards in processes, methods and organization.
- Optimization of existing processes and equipment according to profitability aspects.
- Define, coordinate and perform training sessions for team in order to improve skills and performance level.
- Ensures all tools and software are available for department.
- Work according to KANBAN-system and FIFO.
- Responsibility for product.
- Implementation of improvement process.
- Ensure and contribute to financial targets and results.
- Planing, control and saving of the department budget.

Process Teame Leader

from 04.2017 to 03.2018 (11 months)
Fujikura Automotive Ukraine Lviv, Львів (Машинобудування)

- Coordinate of process engineering team;
- Plant layout optimization;
- Preparing of the budget for new projects implementation;
- Manage operating expense budget of Process Engineering team;
- Process Flow development;
- Cooperation with Customer Service;
- Change Management activity. Overseeing the implementation of design changes;
- Feasibility study related to engineering changes;
- Solving production problems;
- Conducting training for production employees;
- Сooperation with all departments of the plant.

Process Engineer

from 10.2016 to 03.2017 (5 months)
Fujikura Automotive Ukraine Lviv, Львів (Машинобудування)

- Process development for Serial Production;
- Optimization of the existed production technologies, development of the new technologies and processes of production;
- Standardization and arrangement of a working place;
- Work with drafts;
- Preparation of all the documentation for producing the final product;
- Creating drawings of boards for produce electrical harnesses;
- Cooperation with manufacturers of equipment for produce electrical harnesses;
- Process Flow development;
- Conducting training for production employees;
- Change Management activity.

Preparatory production engineer, team-leader

from 09.2007 to 09.2016 (9 years)
LEONI, Стрий (Машинобудування)

optimization of the existed production technologies, development of the new technologies and processes of production, standardization and arrangement of a working place, adherence to a discipline of a process, realization of client’s demands, work with drafts, making up instructions, elaboration and improving of the wiring nets production, correcting the processes, preparation of all the documentation for producing the final product, teaching the staff.

Cutting department administrator

from 11.2006 to 08.2007 (9 months)
LEONI, Стрий (Машинобудування)

organization of work and production, working out the targets for lowing down the man-hour, increasing the quality of the production, providing production the output in time, discharging the scrap, providing the effectiveness of the circulation of the material by the means of “kanban”( the first has come, the first has gone).

Operator of technical installations

from 06.2006 to 10.2006 (4 months)
LEONI, Стрий (Машинобудування)

servicing and work with the machines: ULMER, TWISTER, ONDAL, SCHÄFER, GANUSA, KOMAX; producing the products in time and of good quality; conscientious attitude to doing some certain works (clipjoing crimping, shrinking, bandage and wiring the wires, cutting hoses); careful behaviour with the equipment, keeping up the discipline and order.

Education

National University 'Ivan Franko'​ , Lviv

Management of organizations, Львів
Higher, from 2004 to 2005 (1 year)

master’s degree in management of organizations

National University 'Ivan Franko'​ , Lviv

Management, Львів
Higher, from 2000 to 2004 (4 years)

bachelor’s degree in management

Knowledge and skills

Language proficiencies

English — average