Personal information hidden

Mykola Yarynovskyi
Phone: [open contact info](look above in the "contact info" section)
E-mail: [open contact info](look above in the "contact info" section)

OBJECTIVE

I am a Piping Engineer with over 13 years of post graduate experience in large international projects.
I was involved in FEED and Detail Design stages of onshore & offshore projects, semiconductor
manufacturing.

PROFESSIONAL EXPERIENCE
BIM Leaders LTD

Head of Piping Group
2022 - present
Head of the design team on a high-tech project INTEL FAB38, Israel.
- Coordination and implementation of piping engineering.
- Maintaining design integrity and quality within the piping engineering team.
- Checking of piping drawings.
- Coordination of work with project offices in different parts of the world.
- Selection of engineers and team formation.
- Report of the work of the engineering team.
CNGS Engineering Kyiv
Process Design Department Head
2015-2022
- Coordination and implementation of piping engineering.
- Maintaining design integrity and quality within the piping engineering team.
- Checking of piping drawings.
- Preparation piping stress analysis.
Head of piping group
2014 - 2015
- Planning, monitoring and control of the works.
- Coordination of the works implementation. Project technical support.
- Involved in the checking job of Line–Lists, Piping Plans, ISO- Drawings, Specifications, Clash
Report and 3D-Model.

CNGS Engineering
Piping Engineer (Oil & Gas Industry)
2010 - 2014
- Design of oil and gas facilities (development of PFD's, P&ID's, piping layouts, equipment plans,
isometric drawings, specifications, data sheets, terms of references, 3D modeling);
- Pipeline/piping static and dynamic stress analysis in Autopipe software (based on ASME B31.3,
ASME B 31.4, ASME B 31.8);
- Flare stack calculations (based on API 521);
- Supports calculation and design.

1
Involvement in projects:

Project EPIC OF BALANCE WORKS RELATED TO SIX INFIELD
PIPELINES
Date\Year 2014 – present
Location: Caspian Sea, Turkmenistan
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Head of piping group
Project description: Purpose of this Project is to connect already laid pipelines with topside
facilities at both ends of the pipelines by adding the required subsea pipe
spools, risers, etc. This infield pipelines network will transport produced
oil, associated gas and water (multiphase flow) from platforms at LAM
and ZHDANOV fields to 30-inch trunkline, which will be transported
further to onshore treatment / storage Facility, CPSF in Hazar.
Key Planning, monitoring and control of the works. Coordination of the works
responsibilities: implementation. Project technical support.
Project DEVELOPMENT OF FILANOVSKY FIELD CENTRAL PROCESS
PLATFORM (DETAIL DESIGN DOCUMENTATION
DEVELOPMENT)
Date\Year 2014 – present
Location: Caspian Sea, Russia
Customer: LUKOIL
Occupied Position: Head of piping group
Project description: Detail design documentation development of Filanovsky field central
process platform
Key Planning, monitoring and control of the works. Coordination of the works
responsibilities: implementation. Project technical support.
Project EPIC OF WELLHEAD PLATFORM LAM-E WITH ASSOCIATED
PIPELINES
Date\Year 2014
Location: Caspian Sea, Turkmenistan
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: With alignments of Company growth and future plan and based on the
production forecast, EPIC (engineering, procurement, installation and
construction) of 2 subsea pipelines and wellhead cum drilling platform for
jack up drilling rig operations is required to enhance the production from
these fields.
Key Preparation of piping stress analysis design basis. Piping stress analysis of
responsibilities: product manifold (based on ASME B31.3)
Project OIL TREATMENT SYSTEM FOR FILANOVSKY FIELD
CENTRAL PROCESS PLATFORM
Date\Year 2013
Location: Caspian Sea, Russian Federation
Customer: Aker Solutions
Occupied Position: Piping Engineer
Project description: Design and construction of 12 complete skids for central process platform
on Filanovsky field: 1-st stage separators, 2-nd stage separators, 3-d stage
separators, dehydrators, dessanders and buffer vessels.
Key Responsible for preparation piping stress analysis in Autopipe software
responsibilities: (code ASME B31.3 stress calculation, nozzle flexibility, supports loads,
flange leakage analysis, modal analysis, safety valves reaction loads,
seismic loads, wind and snow loads)
2
Project PARTIAL REPLACEMENT OF TWO 12” TRUNKLINES
Date\Year 2013
Location: Turkmenistan (offshore/ onshore)
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: With alignments of Company growth and future plan and based on the
production forecast, new subsea pipelines are required to be installed.
Key Piping stress analysis in Autopipe software (based on ASME B31.3,
responsibilities: ASME B 31.8)
Design basis, isometric drawings, procedure for preparation and testing of
process piping, impact testing requirement analysis, layouts, etc.
Project NEW SLUG CATCHER AND 3 PHASE SEPARATOR AT CPSF
Date\Year 2013
Location: Turkmenistan (onshore)
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: EPIC of slug catcher and 3 phase separator
Key Piping static stress analysis in Autopipe software, P&ID's, piping layouts,
responsibilities: equipment plans, isometric drawings, 3D modeling of piping and
equipment, hazardous areas classification philosophy, specifications and
data sheets
Project DEVELOPMENT OF FILANOVSKY FIELD CENTRAL PROCESS
PLATFORM (DETAIL DESIGN DOCUMENTATION
DEVELOPMENT)
Date\Year 2012 – 2013
Location: Caspian Sea, Russia
Customer: LUKOIL
Occupied Position: Piping Engineer
Project description: Detail design documentation development of Filanovsky field central
process platform
Key Piping static stress analysis in Autopipe software
responsibilities: Dynamic stress analysis in Autopipe software (pump flexible connector
calculation)
P&ID's, piping layouts, equipment plans, isometric drawings, 3D
modeling of piping and equipment, specifications and data sheets (for
separators, heat exchangers, pumps, compressors). Review supplier
documentation. Examples of suppliers: Prosernat, Aker Solutions, Ensival
Moret and others.
Project DESIGN OF SUBMARINE PIPELINES FOR STICKY OIL
(ELECTRICAL HEAT TRACING SYSTEM WAS USED)
Date\Year 2012
Location: Black Sea, Ukraine
Customer: Feodosia oil tank farm
Occupied Position: Piping Engineer
Project description: Temperature of wax deposition on the walls of subsea pipelines is +40C.
Min. sea water temperature is +1.5, max. +24C. Pigging is prohibited
because of subsea manifold. Submarine pipelines with electrical heat
tracing system were designed and constructed.
Key 3D modeling, specifications and data sheets, review supplier
responsibilities: documentation, coordinated with other disciplines during all stages of
project.
Project EPIC OF BLOCK-4 RISER PLATFORM AND FUTURE RISERS
Date\Year 2011
3
 Location: Turkmenistan (offshore/ onshore)
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: With alignments of Company growth and future plan and based on the
production forecast, EPIC (engineering, procurement, installation and
construction) of riser platform with 2 risers were required to enhance the
production from these fields.
Key Prepared riser flexibility analysis in AutoPIPE software, design basis,
responsibilities: P&ID's, piping layouts, equipment plans, isometric drawings, 3D
modeling, specifications and data sheets, etc.
Project EPIC OF BLOCK 2 PLATFORM PIPELINES RECONNECTION
Date\Year 2011
Location: Turkmenistan (offshore/ onshore)
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: Technical upgrade of Block 2 platform and pipelines reconnection
Key Pipeline minimum wall thickness calculation, piping layouts, equipment
responsibilities: plans, isometric drawings, 3D modeling, specifications and data sheets,
etc.
Project EPIC OF SUBMARINE PIPELINES
Date\Year 2010
Location: Turkmenistan (offshore/ onshore)
Customer: Dragon Oil (Turkmenistan) Ltd
Occupied Position: Piping Engineer
Project description: EPIC of 4 submarine pipelines
Key Piping layouts, equipment plans, isometric drawings, 3D modeling,
responsibilities: specifications and data sheets, heat tracing requirements, etc.
2010-2014 PREPARATION OF BID DOCUMENTATION
Key scope of work, design basis, 3D modeling, equipment plans, etc.
responsibilities:

EDUCATION
2009 – 2010 Ivano-Frankivsk National Technical University of Oil and Gas, Oil and
Gas Engineering Faculty
Master Degree
2005 – 2009 Ivano-Frankivsk National Technical University of Oil and Gas, Oil and
Gas Engineering Faculty
Bachelor
2014- Safety familiarization, basic training and instruction for all
seafarers
2014 – CAESAR II Certified Engineer
2012 – Aveva PDMS Certified Engineer
2010 – Lira Certified Engineer. LIRA is modern software package for
analysis and design of building and mechanical engineering structures of
different purposes.
2010 – got qualification “Driller's assistant of 4 category”
2009 – got qualification “Operator of oil and gas industry of 4 category”
2009 – Manufacturing practice (research institute "Shelf", Simferopol,
Ukraine)

4
 2006 – Practical training at the Geological department of the Ivano-
Frankivsk National Technical university of Oil and Gas
2006 License to driver vehicle

PROFESSIONAL SKILLS

Computer skills:
- Microsoft Office/ Microsoft Excel; Mathcad; AutoCAD; Bentley Microstation;
Bentley AutoPipe; Bentley AutoPipe Vessel, Bentley Project Wise; Bentley PlantSpace
AutoIsogen; CAESAR II
Experienced in working with Codes and Standards: API, ASME, ANSI, DNV, GOST

LANGUAGES
- English, Russian, Ukrainian - fluent in written and spoken

PERSONAL DATA
Capability of self-education (I have studied Bentley AutoPipe software, etc.);
Quick learning skills. Responsible, hard-working, communicative.

5