Контактная информация

Соискатель указал телефон и эл. почту.

Получить контакты этого кандидата можно на странице https://www.work.ua/resumes/1637446

Опыт работы

Structural Engineer

с 06.2015 по наст. время (8 лет 11 месяцев)
TECHNOCOMPLECT, Киев (Development of equipment for crushing and classification of bulk materials)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis (statics, dynamics, durability, rtc.). CFD Analysis (CFX, Fluent), Multiphase Flow Modeling. Modification and optimization of the structure. Post-processing and reporting.

Structural Engineer

с 01.2015 по 12.2015 (11 месяцев)
TECHNOPROMIMPEX, Харьков (Specializing in the manufacture and modernization of industrial equipment for chemical industry)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Calculations of fatigue stress of welds. CFD Analysis. Modification and optimization of the structure. Post-processing and reporting.

Structural Engineer

с 03.2014 по 09.2014 (6 месяцев)
Dr. Victor Sykaylo, Ingenieur Buro, Nurnberg (Ingenieur Buro)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Submodeling. Post-processing and reporting

Engineer designer II category

с 04.2011 по 11.2012 (1 год 7 месяцев)
UkrSSEC “ENERGOSTAL” (Construction, architecture, interior design)

Designing, calculation and creation of three-dimensional model and FEM analysis.
Numerical investigation of aerodynamic characteristics of filter tube FRPR–250М

Engineer designer

с 09.2010 по 12.2010 (3 месяца)
Industrial company “Agro import” (Tractor construction)

Designing, calculation and creation of three-dimensional model of a thermal vacuum forming machine.

Engineer designer

с 06.2010 по 08.2010 (2 месяца)
UBC Promo Group (Construction, architecture, interior design)

Designing, calculation and creation of three-dimensional model.

Образование

National Technical University «Kharkov Polytechnical Institute»

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Высшее, с 2012 по 2016 (3 года 7 месяцев)

A Doctor of Philosophy (PhD) at "Theory and Systems of Mechanisms and Machines Automated Design" Chair. National Technical University «Kharkov Polytechnic Institute» Kharkov, Ukraine.
Speciality – Dynamics and strength of machines
Thesis theme: Structural strength analysis of the compound thin-walled structures with joint elements

National Technical University «Kharkov Polytechnical Institute»

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Высшее, с 2009 по 2011 (1 год 5 месяцев)

The engineer of mechanics diploma with distinction
Specialty: systems analyst engineer

National Technical University «Kharkov Polytechnical Institute» Kharkov, Ukraine.

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Высшее, с 2005 по 2009 (3 года 10 месяцев)

The bachelor diploma with distinction
Specialty: computer Science

Знания и навыки

Знание языков

• Русский — свободно
• Украинский — свободно
• Английский — продвинутый

Дополнительная информация

Personal details:
Name:Aleksandr Atroshenko
Telephone:[открыть контакты](см. выше в блоке «контактная информация»)
Email:[открыть контакты](см. выше в блоке «контактная информация»); [открыть контакты](см. выше в блоке «контактная информация»)

Skype:alexandr.atroshenko

Address: 162V Akademika Pavlova str., ap. 54, 61000 Kharkiv, Ukrane
Date/place of birth:02 August 1987, Donetsk region, Konstantinovka, Ukraine
Nationality:Ukranian
Marital status:Single. No children

Qualification highlights:
Engineer's degree in Mechanical Engineering.
7+ years hands-on experience in mechanical engineering in.
Skilled with different CAD/CAE software
Good knowledge/understanding of machining technologies, materials etc.
Able to work as a part of a team (international) or independently.
Well organized and responsible.
Engineer's PhD in Mechanical Engineering.
Static, dynamic, fatigue, thermal, eigenvalue and buckling analysis.
Education:
2005 – 2011National Technical University "Kharkov Polytechnic Institute" Kharkov, Ukraine.

Faculty: Transport machine-building
Specialization: Computer modelling of mechanical systems
Main subjects: the theory of elasticity, the theory of materials strength, the theory of thin-walled elements, the theory of oscillations, FEM, 3D-modelling

Bachelor diploma theme: Computational and Experimental Research of Natural Frequencies and Modes of Wind Power Plant Model in the ANSYS medium
Specialty: computer Science

Master of Science diploma theme: Investigation of Natural Frequencies and Vibration Modes of Wind Power Plant Frame.
Specialty: systems analyst engineer
Date of graduates: 07.02.2011

2012 – 2016Philosophiæ Doctor (PhD) at "Theory and Systems of Mechanisms and Machines Automated Design" Chair. National Technical University «Kharkov Polytechnic Institute» Kharkov, Ukraine.Speciality – Dynamics and strength of machines
Thesis theme: Structural strength analysis of the compound thin-walled structures with joint elements
Certificates:
Dec. 2010Certified SolidWorks Associate, Certificate ID: C-ZG8LKTDZ5D
October 2014Autodesk Certified Professional: Inventor 2014, ID: 00375477

Computation:
Dec. 2012CAD-OLYMP 2012, Moscow Diploma (Autodesk)
October 2013"Shape of Future 2013" 1-st place "Engineering analisys" (Autodesk)
October 2014"Shape of Future 2014" 2 place "Engineering analisys" (Autodesk)

Experience:
2008 – 2011National Technical University "Kharkov Polytechnic Institute" Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model of a two-level cylindrical reducer .
Designing, calculation and creation of three-dimensional model of gearbox DSG.
Numerical and experimental investigation of the own frequencies and forms of the prototype of wind powered plant at different load variants.


Oct – Dec 2010Industrial company “Agro import”, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model of a thermal vacuum forming machine. Static and Steady-State Thermal analyses in ANSYS. Finite element modeling.


June – Dec 2010UBC Promo Group, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model. Static analyses in ANSYS.


Apr 2011 – Nov 2012UkrSSEC “ENERGOSTAL”, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model. Static, fatigue, eigenvalue and buckling analyses in ANSYS. Computational Fluid Dynamic, CFX, Fluent.
Numerical investigation of fluid dynamics characteristics of filter bag FRPR–250М.


June – Aug 2012Focal Line Solar, LLC. Revolutionary Solar Technology, USA.

Designing, calculation of Solar Concentrated Photovoltaic & Thermal (CPVT) module. Computational Fluid Dynamic, CFX.

March – Sept 2014Dr. Victor Sykaylo, Ingenieur Buro, Germany.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Submodeling. Post-processing and reporting.

Jan – Dec 2015TECHNOPROMIMPEX, Kharkov, Ukraine.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Calculations of fatigue stress of welds. CFD Analysis. Modification and optimization of the structure. Post-processing and reporting.

June 2015 – nowTECHNOCOMPLECT, Kiev, Ukraine.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis (statics, dynamics, durability, rtc.). CFD Analysis (CFX, Fluent), Multiphase Flow Modeling. Modification and optimization of the structure. Post-processing and reporting.

Apr 2016 – nowKRAY.TECHNOLOGY, Kiev, Ukraine.

CFD Engineer. Сreation of the Geometry/Finite Element models. CFD Analysis (CFX, Fluent). Post-processing and reporting. Kray Technologies produces industrial drones for crop protection.

Computer skills:CAD software: Pro/Engineer (5+years), SolidWorks (7+years), NX Unigrafics (1+year),Catia V5 (1+