Контактная информация

Соискатель указал телефон , эл. почту и LinkedIn.

Получить контакты этого кандидата можно на странице https://www.work.ua/resumes/1861837/

Опыт работы

Lead Product Process Engineer

с 03.2022 по наст. время (3 года 5 месяцев)
Dezega SP, Інші країни (Машинобудування)

•Analysis of the design documentation package for a new product: understanding the manufacturing technology of each part, calculating the preliminary cost, developing technical specifications for outsourcing
•Development of the product manufacturing route, determination of process control points, calculation of production time and ОЕЕ
•Development of process requirements
•Release planning: Define product release dates and milestones.
•Monitoring and evaluation: Track product success rates and make necessary adjustments.
•management of product design and development processes, quality control and compliance with consumer expectations
•Lean manufacturing based on Lean's methods for eliminating all types of losses, organizing production processes with a high level of value creation, and manufacturing products with zero defects
•Development and implementation of plans for implementation of lean production system at the enterprise from scratch, coordination of work at all stages of Lean organization, leadership in lean production organization
•Implementation of lean manufacturing tools in the manufacturing sector.
• FMEA risk management
• PFC development

Chief Project Technologist

с 08.2018 по 03.2022 (3 года 7 месяцев)
Dezega, Київ (Машинобудування)

•Project process solution design management
•Organization and control of process approval of design documentation
•Organization and control of process documentation archive
•Organization and control of process documentation development and changes in approved process documentation
•Organization and control of approval of process documentation with production departments
•Organization and control of process data entry into the system 1С
•Setting, adjustment, and monitoring of process preparation tasks (die tooling, tools, measuring equipment, welding tooling, molds)
•Organization of manufacturing and supply of parts, tools, tooling, equipment
•Control over deliveries of parts and assembly units from external suppliers managed by the Holding
•Organization of training of employees of production sites for technological operations
•Development Value Process Map
•Development List of Co-operated Deliveries

Chief electroplating engineer (remotely)

с 08.2016 по наст. время (9 лет)
ООО "Экопласт Штанцл Украина", Днепр (Машинобудування)

Design and reconstruction of galvanic production. Consulting assistance at all stages of design. Launch and support technology at newly built enterprises. Introduction of modern technologies that reduce the cost of galvanic coatings and improve their quality

Chief engineer of galvanic coating production

с 05.2016 по 08.2018 (2 года 3 месяца)
ООО "Эмблем", Киев (Машинобудування)

organization of electroplating area operation, maintenance of electroplating processes in working condition, introduction of new types of coatings, analysis of causes of failure, development of electroplating processes

Инженер ОТК

с 03.2016 по 05.2016 (2 месяца)
ООО "Авангард", Вишневое (металлообработка, электромонтажное и электротехническое оборудование)

организация и проведение контроля качества готовой продукции, проведение межоперационного контроля на рабочих местах и после проведения основных технологических операций

Process Engineer - Electroplating

с 10.2013 по 08.2014 (10 месяцев)
ООО "CORUM - Донгормаш", Донецьк (Машинобудування)

Organization and control of process processes of protective coatings (galvanic and paint coatings) of metals from ferrous and non-ferrous metals:
Establishment of work procedure and operational route of parts processing
Calculation of production capacity and equipment load
Development of process standards, instructions, roadmaps, technical level and product quality maps and other process documentation
Control over observance of process discipline in workshops and correct operation of process equipment.
Analysis of causes of failure and production of products of poor quality and varieties, participation in the development of measures to prevent and eliminate them
Development of methods of technical control and testing of products

Инженер - технолог

с 06.2009 по 01.2010 (7 месяцев)
ООО "БетаTVcom", Донецк (электроника)

разработка участка нанесения гальванических покрытий на изделия из черных и цветных металлов
Разработка технологических нормативов, инструкций, маршрутных карт, карт технического уровня и качества продукции и др. технологической документации
Контроль над соблюдением технологической дисциплины в цехах и правильной эксплуатацией технологического оборудования.

Process Engineer - Electroplating

с 06.2007 по 02.2013 (5 лет 8 месяцев)
ОАО "Точмаш", Донецьк (Машинобудування)

Organization and control of process processes of protective coatings (galvanic and paint coatings) of metals from ferrous and non-ferrous metals:
Establishment of work procedure and operational route of parts processing
Calculation of production capacity and equipment load
Development of process standards, instructions, roadmaps, technical level and product quality maps and other process documentation
Control over observance of process discipline in workshops and correct operation of process equipment.
Analysis of causes of failure and production of products of poor quality and varieties, participation in the development of measures to prevent and eliminate them
Development of methods of technical control and testing of products

Образование

Донецкий национальный технический университет

Физико-металлургический факультет, металловедение, г. Донецк
Высшее, с 1998 по 2005 (6 лет 9 месяцев)

Дополнительное образование и сертификаты

бухгалтерский учет

2013 год

Lean Institute of Ukraine/Yellow belt

2020, 4 month
Сертификат

Lean Institute of Ukraine/Green belt

2020, 4 month
Сертификат

Advanced Exel

2020, 2 month
Сертификат

Знания и навыки

• (ISO
• ASTM
• ANSI
• MS Excel
• Продуктивність
• MS Word
• MS Office
• AutoCAD
• Висока працездатність
• Користувач 1С
• Робота в команді
• Дисциплінованість
• Наполегливість

Знание языков

Английский — средний

Дополнительная информация

ответственность, коммуникабельность, способность к быстрому обучению, умение работать в команде.