Contact information

The job seeker has entered a phone number and email.

You can get this candidate's contact information from https://www.work.ua/resumes/1637446

Work experience

Structural Engineer

from 06.2015 to now (8 years 11 months)
TECHNOCOMPLECT, Киев (Development of equipment for crushing and classification of bulk materials)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis (statics, dynamics, durability, rtc.). CFD Analysis (CFX, Fluent), Multiphase Flow Modeling. Modification and optimization of the structure. Post-processing and reporting.

Structural Engineer

from 01.2015 to 12.2015 (11 months)
TECHNOPROMIMPEX, Харьков (Specializing in the manufacture and modernization of industrial equipment for chemical industry)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Calculations of fatigue stress of welds. CFD Analysis. Modification and optimization of the structure. Post-processing and reporting.

Structural Engineer

from 03.2014 to 09.2014 (6 months)
Dr. Victor Sykaylo, Ingenieur Buro, Nurnberg (Ingenieur Buro)

Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Submodeling. Post-processing and reporting

Engineer designer II category

from 04.2011 to 11.2012 (1 year 7 months)
UkrSSEC “ENERGOSTAL” (Construction, architecture, interior design)

Designing, calculation and creation of three-dimensional model and FEM analysis.
Numerical investigation of aerodynamic characteristics of filter tube FRPR–250М

Engineer designer

from 09.2010 to 12.2010 (3 months)
Industrial company “Agro import” (Tractor construction)

Designing, calculation and creation of three-dimensional model of a thermal vacuum forming machine.

Engineer designer

from 06.2010 to 08.2010 (2 months)
UBC Promo Group (Construction, architecture, interior design)

Designing, calculation and creation of three-dimensional model.

Education

National Technical University «Kharkov Polytechnical Institute»

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Higher, from 2012 to 2016 (3 years 7 months)

A Doctor of Philosophy (PhD) at "Theory and Systems of Mechanisms and Machines Automated Design" Chair. National Technical University «Kharkov Polytechnic Institute» Kharkov, Ukraine.
Speciality – Dynamics and strength of machines
Thesis theme: Structural strength analysis of the compound thin-walled structures with joint elements

National Technical University «Kharkov Polytechnical Institute»

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Higher, from 2009 to 2011 (1 year 5 months)

The engineer of mechanics diploma with distinction
Specialty: systems analyst engineer

National Technical University «Kharkov Polytechnical Institute» Kharkov, Ukraine.

Theory and Systems of Mechanisms and Machines Automated Design, Kharkov
Higher, from 2005 to 2009 (3 years 10 months)

The bachelor diploma with distinction
Specialty: computer Science

Knowledge and skills

Language proficiencies

• Russian — fluent
• Ukrainian — fluent
• English — advanced

Additional information

Personal details:
Name:Aleksandr Atroshenko
Telephone:[open contact info](look above in the "contact info" section)
Email:[open contact info](look above in the "contact info" section); [open contact info](look above in the "contact info" section)

Skype:alexandr.atroshenko

Address: 162V Akademika Pavlova str., ap. 54, 61000 Kharkiv, Ukrane
Date/place of birth:02 August 1987, Donetsk region, Konstantinovka, Ukraine
Nationality:Ukranian
Marital status:Single. No children

Qualification highlights:
Engineer's degree in Mechanical Engineering.
7+ years hands-on experience in mechanical engineering in.
Skilled with different CAD/CAE software
Good knowledge/understanding of machining technologies, materials etc.
Able to work as a part of a team (international) or independently.
Well organized and responsible.
Engineer's PhD in Mechanical Engineering.
Static, dynamic, fatigue, thermal, eigenvalue and buckling analysis.
Education:
2005 – 2011National Technical University "Kharkov Polytechnic Institute" Kharkov, Ukraine.

Faculty: Transport machine-building
Specialization: Computer modelling of mechanical systems
Main subjects: the theory of elasticity, the theory of materials strength, the theory of thin-walled elements, the theory of oscillations, FEM, 3D-modelling

Bachelor diploma theme: Computational and Experimental Research of Natural Frequencies and Modes of Wind Power Plant Model in the ANSYS medium
Specialty: computer Science

Master of Science diploma theme: Investigation of Natural Frequencies and Vibration Modes of Wind Power Plant Frame.
Specialty: systems analyst engineer
Date of graduates: 07.02.2011

2012 – 2016Philosophiæ Doctor (PhD) at "Theory and Systems of Mechanisms and Machines Automated Design" Chair. National Technical University «Kharkov Polytechnic Institute» Kharkov, Ukraine.Speciality – Dynamics and strength of machines
Thesis theme: Structural strength analysis of the compound thin-walled structures with joint elements
Certificates:
Dec. 2010Certified SolidWorks Associate, Certificate ID: C-ZG8LKTDZ5D
October 2014Autodesk Certified Professional: Inventor 2014, ID: 00375477

Computation:
Dec. 2012CAD-OLYMP 2012, Moscow Diploma (Autodesk)
October 2013"Shape of Future 2013" 1-st place "Engineering analisys" (Autodesk)
October 2014"Shape of Future 2014" 2 place "Engineering analisys" (Autodesk)

Experience:
2008 – 2011National Technical University "Kharkov Polytechnic Institute" Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model of a two-level cylindrical reducer .
Designing, calculation and creation of three-dimensional model of gearbox DSG.
Numerical and experimental investigation of the own frequencies and forms of the prototype of wind powered plant at different load variants.


Oct – Dec 2010Industrial company “Agro import”, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model of a thermal vacuum forming machine. Static and Steady-State Thermal analyses in ANSYS. Finite element modeling.


June – Dec 2010UBC Promo Group, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model. Static analyses in ANSYS.


Apr 2011 – Nov 2012UkrSSEC “ENERGOSTAL”, Kharkov, Ukraine.
Designing, calculation and creation of three-dimensional model. Static, fatigue, eigenvalue and buckling analyses in ANSYS. Computational Fluid Dynamic, CFX, Fluent.
Numerical investigation of fluid dynamics characteristics of filter bag FRPR–250М.


June – Aug 2012Focal Line Solar, LLC. Revolutionary Solar Technology, USA.

Designing, calculation of Solar Concentrated Photovoltaic & Thermal (CPVT) module. Computational Fluid Dynamic, CFX.

March – Sept 2014Dr. Victor Sykaylo, Ingenieur Buro, Germany.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Submodeling. Post-processing and reporting.

Jan – Dec 2015TECHNOPROMIMPEX, Kharkov, Ukraine.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis. Calculations of fatigue stress of welds. CFD Analysis. Modification and optimization of the structure. Post-processing and reporting.

June 2015 – nowTECHNOCOMPLECT, Kiev, Ukraine.

Structural Engineer. Сreation of the Geometry/Finite Element models. Carrying out a different type of the Finite Element Analysis (statics, dynamics, durability, rtc.). CFD Analysis (CFX, Fluent), Multiphase Flow Modeling. Modification and optimization of the structure. Post-processing and reporting.

Apr 2016 – nowKRAY.TECHNOLOGY, Kiev, Ukraine.

CFD Engineer. Сreation of the Geometry/Finite Element models. CFD Analysis (CFX, Fluent). Post-processing and reporting. Kray Technologies produces industrial drones for crop protection.

Computer skills:CAD software: Pro/Engineer (5+years), SolidWorks (7+years), NX Unigrafics (1+year),Catia V5 (1+