Igor
Senior, Lead Manufacturing Engineer, 75 000 грн
- Занятость:
- Полная занятость, неполная занятость.
- Возраст:
- 39 лет
- Город проживания:
- Ужгород
- Готов работать:
- Другие страны, Ужгород
Контактная информация
Соискатель указал телефон и эл. почту.
Фамилия, контакты и фото доступны только для зарегистрированных работодателей. Чтобы получить доступ к личным данным кандидатов, войдите как работодатель или зарегистрируйтесь.
Получить контакты этого кандидата можно на странице https://www.work.ua/resumes/1298168
Знание языков
- Английский — продвинутый
- Немецкий — средний
- Русский — свободно
- Украинский — свободно
- Польский — начинающий
Дополнительная информация
Podgorskiy Igor
Contacts:
tel.: [
e-mail [
Male,
B.y.1985,
Uzhgorod city
Ukraine.
Work Experience:
Flex Ukraine
Design Manager, SMT & BE (Back End) process Engineering supervisor.
Automation department.
August 2019 - November 2021
Flex Ukraine
Design Manager, SMT process Engineering leader.
Automation department.
July 2015 - August 2019.
Flextronics Ukraine
Senior Engineer,
Automation department.
May 2014 - July 2015.
Flextronics Ukraine
SMT Process Engineering leader,
Automation department.
November 2013 - May 2014.
Flextronics Ukraine
Manufacturing Engineer,
Automation department.
November 2012 - 2013.
Jabil Circuit Ukraine LLC Uzhgorod, Ukraine
January 2010 – November 2012
Manufacturing engineering technicianFUJI NXT (NXT2) equipment repair and maintenance.
Jabil Circuit Ukraine LLC Uzhgorod, Ukraine
March 2009 – January 2010
Manufacturing engineer at “XXX” PCB production
-Manual Component Insertion and Touch-up work places creation and installation
-Balancing of components between MCP positions
-Product qualification
-Wave solder machine installation and validation
-Wave soldering process creation and process control
-Work instruction, procedures creation
-Experience with following equipment: (“FESTO” and “SMC” - pneumatic systems; “Speedline Electrovert ELECTRA” – wave soldering; “Vitronics Soltec DELTA 6622CC” , “DELTA3” - wave soldering; “Vitronics Soltec XPM2”, “XPM3” - reflow soldering; “NUTEK” - conveyors, FIFO-LIFO buffers, loaders-un loaders )
Jabil Circuit Ukraine LLC Uzhgorod, Ukraine
April 2008 – March2009 Substitutes Lead manufacturing engineer at “XXX” PCBA
-CER creation
-SMT Line installation
-Hand assembly line creation and installation (work places, jigs, screwdrivers, process, control)
-Wave soldering process implementation at UZH site
-Close work with customer
-Experience with following equipment: (“BOSCH” and “DELVO” – screwdrivers; “Speedline Electrovert ELECTRA” – wave soldering; “Vitronics Soltec DELTA 6622CC” , “DELTA3” – wave soldering; “NUTEK” - conveyors, FIFO-LIFO buffers loaders-un loaders)
Jabil Circuit Ukraine LLC Uzhgorod, Ukraine
February 2007 – April 2008
Senior shift Manufacturing engineering technician at “XXX” sub-assembly production (hand assembly supporting technician)
-Line installation
-Equipment maintenance
-Equipment repairing/adjustment
-Downtime reduction
-Downtime and repair reporting
-Experience with following equipment: (“TRADEX” – component insertion; ”SoniTEC” - heat sink welding ; ”SONOTEC” – ultrasonic welding; “PIRAS PRESS” – press equipment )
Jabil Circuit Ukraine LLC Uzhgorod, Ukraine
July 2006 – February 2007Line operator at “XXX” sub-assembly production-Rework operator (hand assembly)
-“TRADEX” operator
-FNI operator (hand assembly)
Trainings:
FESTO DIDACTIC level – 1 – 2 – 3 (07-P/EP1-0038)
08.10.2007Operation and maintenance of pneumatic systems with pneumatic and electric control
Discrete pneumatic with pneumatic and electric control:
- reading
- perform installation
- operation and maintenance
- Work with “FluidSim” for modelling pneumatic circuits
JSD
19.02.2009Vitronics-Soltec DELTA 6622CC wave soldering machine
-Basic knowledge
-Machine operation
-Troubleshooting
-Machine maintenance
-Electrical troubleshooting
Consumer operations
31.05.2009Advanced manufacturing training
-Surface finish
-Wave solder
MCE (Management Centre Europe)
01.07.2009Project management
-Project management
-Advanced project management
51016417-MANUFACTURING ENG TECHNICIAN IV
02.11.2011
-ME introduction
-Introduction to KEY processes
-Assembly Overview
-PCB overview
-Design For Manufacturing
-Department metrics
-Cross functional teamwork
-Cross functional processes
Skills, Knowledge:
- Stencil design.
- CAD. GBR. ODB++.
-Middle PC user - (MS Office, Internet, MS VISIO)
-Experience in process (ASSY, WS, ) set up from the very beginning (main parameters , process control, OCAP, documentation, layout etc.)
-Personnel management (in charge of 15 technicians)
-Quality tools usage (FMEA, CP, PDCA, 8D)
-NPI experience (~ more 500)
-Customer communication experience (PHILIPS, PACE, OSRAM)
-Achievements in Best practice implementation (tooling design)
Personal skills
-Analyzing skills,
-High responsibility level,
-Ability to learn quickly,
-Goal focused,
-Team motivation.
Languages
-English – Fluent
-German - Fluent
-Russian – Native
-Ukrainian – Native
Похожие кандидаты
Начальник виробництва, завідуючий виробництвом, майстер цеху
Ужгород
Керівник виробничо-диспетчерського відділу, інженер з підготовки виробництва
Ужгород, Харьков
Инженер-технолог, начальник смены, участка производства керамического кирпича
Днепр, Пологи, Другие страны
Інженер-конструктор, зав. виробництва, головний інженер
Черкассы, Другие страны, Удаленно
Lead mechanical engineer
Другие страны, Удаленно
Інженер з виробництва, будівництва, сервіс
50000 грн, Днепр, Запорожье
,
еще 8 городов