Сервис поиска работы №1 в Украине
Личные данные скрыты
Этот соискатель решил скрыть свои личные данные и контакты. Вы можете связаться с ним со страницы https://www.work.ua/resumes/18516669/
Інженер-конструктор
- Рассматривает должности:
- Інженер-конструктор, Інженер з електроніки, Стажер з інженерії, Кресляр
- Город проживания:
- Киев
- Готов работать:
- Киев, Удаленно
Контактная информация
Фамилия, контакты и фото доступны только для зарегистрированных работодателей. Чтобы получить доступ к личным данным кандидатов, войдите как работодатель или зарегистрируйтесь.
Загруженный файл
Версия для быстрого
просмотра
Это резюме размещено в виде файла. Эта версия для быстрого просмотра может быть хуже, чем оригинал резюме.
Alisa Klentukh
Mechanical Engineering Student Contact
Mechanical Engineering student with hands-on experience in [открыть контакты ](см. выше в блоке «контактная информация»)
CAD software and 3D printing, with a strong interest in industrial [открыть контакты ](см. выше в блоке «контактная информация»)
design and additive manufacturing.
Education Experience
UNIVERSITY OF BRISTOL PEER TUTOR
BEng, Mechanical May 2024 - Present
Engineering (2nd year)
Sept 2024 - present • Facilitated group discussion sessions with up to 15 people,
encouraging participative learning experiences.
• Enhanced student comprehension by breaking down problems in
simple, step-by-step explanations.
• Supported 1-year engineering students with physics modules and
coursework, including CAD and coding.
Skills
Projects
Technical skills:
FOLDING SOLAR PANELS MECHANISM
CAD design (Autodesk Fusion &
Worked in a 5-person team to design a portable solar panel system,
SolidWorks), Cura, CorelDRAW attached to the car’s roof, that hosts 4 panels when deployed, acting
as an extra power source for the car. In its undeployed (folded) state,
the top panels rotate on the hinges, and cover the bottom panels,
Coding languages:
thus getting more compact. I designed and produced the technical
Python, MATLAB drawings for the gearbox and worked on the initial system analysis
and design.
Soft skills:
ROVER FOR OLYMPUS ROVER TRIALS, hosted by UKSEDS
Problem-solving, adaptability,
Was a lead in a 7-person team developing a rover for rough-
communication, teamwork
terrain traversal, 40° incline climbing, and QR-code recognition.
Defined drivetrain architecture, managed CAD and mechanical
component selection.
Languages GANTRY CRATE
Worked in a 6-person team to design and build a gantry crane,
Ukrainian Native capable of lifting and transporting an 8 kg load. Designed the
English C2
pulley system used for vertical lifting with AutoCAD Fusion,
German B1 printed the pulley base with Cura and produced all laser-cut
components for the structure and track system using
CorelDRAW.
Mechanical Engineering Student Contact
Mechanical Engineering student with hands-on experience in [
CAD software and 3D printing, with a strong interest in industrial [
design and additive manufacturing.
Education Experience
UNIVERSITY OF BRISTOL PEER TUTOR
BEng, Mechanical May 2024 - Present
Engineering (2nd year)
Sept 2024 - present • Facilitated group discussion sessions with up to 15 people,
encouraging participative learning experiences.
• Enhanced student comprehension by breaking down problems in
simple, step-by-step explanations.
• Supported 1-year engineering students with physics modules and
coursework, including CAD and coding.
Skills
Projects
Technical skills:
FOLDING SOLAR PANELS MECHANISM
CAD design (Autodesk Fusion &
Worked in a 5-person team to design a portable solar panel system,
SolidWorks), Cura, CorelDRAW attached to the car’s roof, that hosts 4 panels when deployed, acting
as an extra power source for the car. In its undeployed (folded) state,
the top panels rotate on the hinges, and cover the bottom panels,
Coding languages:
thus getting more compact. I designed and produced the technical
Python, MATLAB drawings for the gearbox and worked on the initial system analysis
and design.
Soft skills:
ROVER FOR OLYMPUS ROVER TRIALS, hosted by UKSEDS
Problem-solving, adaptability,
Was a lead in a 7-person team developing a rover for rough-
communication, teamwork
terrain traversal, 40° incline climbing, and QR-code recognition.
Defined drivetrain architecture, managed CAD and mechanical
component selection.
Languages GANTRY CRATE
Worked in a 6-person team to design and build a gantry crane,
Ukrainian Native capable of lifting and transporting an 8 kg load. Designed the
English C2
pulley system used for vertical lifting with AutoCAD Fusion,
German B1 printed the pulley base with Cura and produced all laser-cut
components for the structure and track system using
CorelDRAW.
Похожие кандидаты
-
Інженер-конструктор
Киев -
Інженер-конструктор
Киев, Винница , еще 7 городов -
Инженер-конструктор
Киев, Львов , еще 3 города -
Конструктор FPV
35000 грн, Киев -
BIM-спеціаліст
Удаленно
Сравните свои требования и зарплату с вакансиями других компаний:
Резюме кандидата размещено по адресу: https://www.work.ua/resumes/18516669/