- PRO
Сергей
Quality manager
- Занятость:
- Полная занятость.
- Возраст:
- 36 лет
- Город:
- Киев
Контактная информация
Соискатель указал телефон и эл. почту.
Фамилия, контакты и фото доступны только для зарегистрированных работодателей. Чтобы получить доступ к личным данным кандидатов, войдите как работодатель или зарегистрируйтесь.
Получить контакты этого кандидата можно на странице https://www.work.ua/resumes/4030510/
Опыт работы
Lead specialist of Industry Department
с 07.2015 по наст. время
(9 лет 2 месяца)
Bureau Veritas Ukraine, Київ (Testing, inspection and certification.)
Providing shop inspection, production technical audits, production process control and quality control in accordance with requirements.
Industry products/process certification in accordance with requirements of standards and directives.
Evaluation and analysis of Supplier.
Providing technical expertise of equipment and metal construction.
Monitoring of resources misuse, implementation of QMS and loss decreasing methods.
Wilding process and products control.
Project managements.
Sales activity and preparation of commercial offers.
Manager | Department of hydraulic and lifting equipment
с 10.2014 по 07.2015
(9 месяцев)
Enerprof LLC, Київ (The dealer of Enerpac, Crossby, Gunebo, Kito)
Visiting enterprises to present the equipment; identification of weaknesses in technological schemes and equipment; determining causes of wearing and ways to improve reliability and fault tolerance of machines.
Design of technological scheme and selecting equipment; searching for ways to improve effectiveness of production.
Providing maintenance and repair of hydraulic station and pumps; producing hydraulic hoses with working pressure up to 400 bar, assembling hydraulic elements in one hydraulic unit.
Providing maintenance of hydraulic jack and lifting equipment (hand hoist and electric crane elements).
Monitoring of resources misuse, implementation of QMS and loss decreasing methods.
Mechanic assistant - Maintenance of offshore drilling units
с 09.2012 по 10.2014
(2 года 1 месяц)
Chernomorneftegaz, Chernomorsk (Oil&Gas production and fields development in the Black Sea shelf)
BOP system mounting, testing and servicing. Providing safety mounting, servicing and hot work at wellhead. Mounting Christmas tree, Chock and Kill lines, packers; providing hydraulic testing of mounted equipment.
Servicing and repairing Varco top drive system including emergency repair work at highest. Carrying out scheduled maintenance work for TDS, rail and hydraulic systems, wire-line anchoring device, sand-line crownblock sheaves, wire pore supply reed, braking system, wire-line, hydraulic and pneumatic supply systems, wire rope supply reel.
Scheduled maintenance and servicing of main pumps:
•Supercharger centrifugal pumps (replacing rotors, sealing and valves)
•Mud pump (pistons and valves replacing, servicing of relive valve unit, repairing and gas-filling of hydraulic damper, servicing mud pump manifolding system, servicing cooling systems
•Servicing and repairing pneumatic pumps
Servicing and scheduled maintenance of main drilling equipment: turntable, iron roughneck, well kill line system, derrick mounting system, jack-up system of drilling rig, etc.
Assembling cement line; leading the operation of cement bulking, cement cleaning and storage. Servicing and repairing storage bulk systems: storage tanks, separators and dust collect systems, pneumatic and bulk lines with technological and safety valves.
Scheduled maintenance of drilling mud separators and cleaner systems, cumulative and storage equipment, chemical mixers, supply and agitator, filtration and dust collect systems.
Service and repair of pneumatic, hydraulic, hand rope and chain hoists, hoisting blocks, etc. Performing lifting equipment tests.
Work with high and ultra-high pressure equipment. Scheduled maintenance, repair and internal testing : emergency process control system, drill HPU, hydropneumatic accumulators, assembling of high/ultra-high pressure lines and manifolds.
Maintenance, repair and testing of pneumatic lines, valves, receivers and pneumatic hand equipment.
Project Manager | Department of pumping equipment and systems
с 08.2010 по 06.2012
(1 год 10 месяцев)
Logrus LLC, Київ (Sales and service of technological equipment)
Enterprises visiting for provide presentations of equipment, identify weaknesses in technological scheme and equipment, determining causes of wearing and ways to improve reliability and fault tolerance of machines.
Provide Internet marketing, consulting in technical issuies.
Design and preparing of technological scheme with pumps, mixer, storage and transporting systems, searching for ways to improve effectiveness of production process (for chemical, petrochemical and miming fields).
Searching incompleteness of resources, providing QMS and methods for loss decreasing.
Образование
National Technical University of Ukraine «Kyiv Polytechnic Institute»
Faculty of Chemical Engineering - Department of Machines and Apparatus of Chemical and Oil Refinery Productions, Київ
Высшее, с 2006 по 2012 (5 лет 6 месяцев)
Master’s degree of National Technical University of Ukraine «Kyiv Polytechnic Institute» (Kyiv, Ukraine)
Qualification - Mechanical Engineer
Дополнительное образование и сертификаты
Tank container periodic inspections according to ADR and RID; IMDG
2017, 3 month
Risk-management System: Principles, Risk Assessment Recommendations and General Techniques for Managers and Experts.
2017
New Construction Commission and Authorized Inspector Course. ASME Section I, IV, V, VIII Div. 1, IX, QAI-1 (2016 Edition), and
2016, 6 month
Quality Management System Lead Auditor Training Course ISO 9001:2015,
2015
Non-destructing training course in accordance with EN 473-2008, UT, VT
2015, 3 month
Rules of design and safe operation of pressure equipment - Training center of “Chernomorneftegaz”-
2013
Blowout preventer equipment. Safety operation. - Training center of “Chernomorneftegaz”
2013
Training “Negotiations with the active sales” - IBT
2012
2nd Mechanic assistant (maintenance of drilling units) - Training center of “Chernomorneftegaz”
2012
Security basic training and instruction for ship crew. - Sevastopol National Technical University
2012
Firefighting (extended program) - Sevastopol National Technical University, Center for training and certification
2012
Specialist on life boats and float boards - Sevastopol National Technical University
2012
First Aid on ship board - Sevastopol National Technical University
2012
Training “Aggressive selling market B2B” – NTA
2010
ISO 14001: 2015 Environmental management - a course for leading auditors. (Bureau Veritas Ukraine).
2017
ISO 50001 Energy Management - Course for Lead Auditors. (Bureau Veritas Ukraine).
2017
Safe work at height with individual insurance funds (Training Center "Novator").
2017
International Welding Engineer Qualification (IWE).
2017
Знания и навыки
- AutoCAD
- Знання офісних програм
- КОМПАС
- Mathcad
- КОМПАС-3D
- Знание офисных программ
- Проведение регламентных работ грузоподъемным механизмам
- Разработка планов контроля производств
- Контроль качества металлоконструкций ДСТУ Б В.2.6-199 и ISO 1090
- Сертификация согласно с требования ISO 3834 и EN 1090
- Монтажные работы
- Ремонт поршневых, центробежных насосов
- Сборках линий высокого давления
- Обслуживание и ремонт запорной арматуры
- Монтаж лесов и др. оборудования для высотных работ
- Работы на высоте. Подготовка и обеспечение.
- Подготовка и обеспечение безопасных огневых работ
- Обслуживание и инспекция оборудование под давлением
- Ведение бизнесс-переговоров
- Управление легковым автомобилем
- 1С
- 1С:Підприємство
- CRM
- MS Excel
- MS PowerPoint
- SolidWorks
- Terrasoft CRM
- Windows
- MS Word
- Операційні системи
- Водіння авто
- Підготовка економічної доцільності реконструкції
- Проведення регламентних робіт та ремонту обладнання
- Ведення перемов та підготовка проектів реконструкції
- Обслуговування насосів відцентрових, поршневих
- Обслуговування гідравлічних станцій та систем управління
- NDT Visual inspection, Sector 7,12, Level 2 Inspector
- Quality Management System Auditor
- Pre-Shipment Inspection (PSI)
- Hydrostatic testing
- Working at Height
- Maintenance of equipment
- Industry products/process certification
- Production process control and technical audits
- Wilding process and products control.
- Аудитор ISO 9001, ISO 14001,ISO 50001
- Cертифікаційні аудити ISO 3834 та EN 1090
- Контроль металоконструкцій ДСТУ Б В.2.6-199 та ISO 1090-2
- Інспекції виробниств
- Preshipment Inspection
Знание языков
- Украинский — свободно
- Русский — свободно
- Английский — средний
Дополнительная информация
Personal skills
Analytical thinking, ability to find compromise solutions, communication skills, ability to extract useful knowledge from any source, ability to learn quickly, responsible attitude to job, effective task performance, resistance to stress.
Другие резюме этого кандидата
- PRO
50 000 грн
Киев, Удаленно
Высшее образование · Полная занятость, неполная занятость
- Директор з якості, ТОВ "КССРЗ", 6 лет 3 месяца
- Провідний спеціаліст промислового департаменту, Bureau Veritas Ukraine, 2 года 11 месяцев
- PRO
Киев, Удаленно
Высшее образование · Полная занятость, неполная занятость
- Аудитор и консультант, Фриланс аудитор/ консультант, 6 лет 3 месяца
- Ведущий специалист промышленного департамента, Bureau Veritas Ukraine, 2 года 11 месяцев
Похожие кандидаты
-
Інженер з якості
Киев -
Контролер якості
Киев, Удаленно -
Контролер якості, ВТК, прасувальниця, пакувальниця
28000 грн, Киев -
Інженер з якості
Киев -
Інженер з якості
Киев -
Фахівець з якості
Киев