Контактна інформація

Шукач вказав телефон та ел. пошту.

Отримати контакти цього кандидата можна на сторінці https://www.work.ua/resumes/1768456/

Досвід роботи

Program Manager

з 08.2025 по нині (8 місяців)
NDA, NDA (Оборонно-промисловий комплекс)

Driving product maturity through coordinated releases, stakeholder alignment, and disciplined delivery processes.

IT Product owner Operational SME

з 10.2022 по 05.2024 (1 рік 8 місяців)
Jabil Circuit Ukraine Limited, Дистанційно (IT)

SME Supervisor

з 07.2019 по 10.2022 (3 роки 4 місяці)
Flex, Мукачево (Машинобудування)

· Serve as the functional expert for manufacturing area assigned.

· Support other Engineers in questions may arise and help resolve them..

· Coordinate and facilitate training for the plant in terms of new hires, new functionality, and upgrades.

· Track and communicate all changes/enhancements to existing process, including upgrades to process.

· Provide support to the users and the department SME's.

· Ensuring the established process is followed diligently

· Carry out methodical machine and process evaluations.

· Maintain and develop documentation for responsible area.

· Participate in the exchange of ideas and information within the department.

· Support Site when there is audits and customer visits

· Provide regular updates to appropriate managers.

· Identify creative ways to reduce cost by streamlining processes (i.e. elimination of non-value added factors.

· Driving continuous improvement through trend reporting analysis and metrics management.

· Offering new ideas and suggestions for improvement. Identifying and implementation new practices and processes that are "best in field".

· Ensure 100% adherence to all company policies and procedures (i.e. Health, Safety and Quality)

· Maintain discretion and confidentiality in all areas pertaining to data and proprietary information, whether internal to Flex or customer specific.

· Adhere to all safety and health rules and regulations associated with this position and as directed by plant manager.

· Complying and following all procedures within the company security policy.

· Performing other duties and responsibilities as assigned.

DFM PCB design engineer

з 01.2018 по 07.2019 (1 рік 7 місяців)
Jabil Circuit Ukraine Limited, Ужгород (Mechanical engineering)

• Perform DFM checks;
• Creating stencil designs with the optimal solder paste apertures;
• Document and report the DFM analysis by using DFM reports;
• Participate in DFM reporting meetings with Operations and
customers across the globe;
• Creating the training materials for newcomers;
• Define and research the optimal footprints for non-standard
components;
•Design PCB (Printed Circuit Board) & PCBA designs (ECAD);
•Actively co-operate in designing and documenting high-quality and
efficient working methods within the ECAD / VAVE / EDM group;
•Perform the necessary research to build up the DFM & ECAD CAD
tool functionality to support the requested PCB technology for new designs.

Achievements at DFM position:
• Done more than 100 stencil designs (tool for solder paste applying to the PCB). Every correct stencil design saves more than 2k $ at the production area (no repairing, no solder voids and solder balls, shorts, etc.).
• Performed more than 150 DFM reports. Was find a lot of issues which would cause problems at the production area.
• Providing consulting services on permanent basics for customers. Suggesting the best solution in case of manufacturing and design issues.

Директор підприємства

з 01.2017 по нині (9 років 3 місяці)
Laptoper, Ужгород (Роздрібна торгівля)

Industrial engineer

з 03.2015 по 12.2017 (2 роки 10 місяців)
Jabil Circuit Ukraine Limited, Ужгород (Mechanical engineering)

from 03.2015 until 12.2017 Jabil Circuit Ukraine Limited, Uzhgorod
• Monitoring and continuously improving daily quality/efficiency performance for assigned areas.
• Designing and procuring production tooling, processing equipment and workplaces.
• Introduction of new products to manufacturing. Preparation of necessary devices, creation of instructions, documentation, drawings etc.
• Realization of NPI, sample production and preparation of relevant documentation
• Minimization of cycle time by manufacturing of products.
• Verifying that machine maintenance is being performed on schedule.
• Reducing of machine-generated scrap by testing and simulation of machines and taking corrective action to improve or correct the operations.
• Reducing of manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.
• Analyzes workforce utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment, modification of machines, improving the quality of production process etc.
Achievements at Industrial engineer position:
• Done successful transfer of large telecom workcell. Created 7 manual assembly production lines. 3 SMT lines. Created production standards for more than 50 workplaces. Team leader for small group of industrial engineers and technicians.
• Successful transfer of automotive work cell.
• Support for 4 workcells
• Approx hard savings by process improvements 15k $ / year

Process engineer

з 04.2013 по 10.2014 (1 рік 7 місяців)
Gentherm, Виноградов (Automotive cable technologies)

Освіта

УжНУ

Інженерно-технічний/Приладобудування, Ужгород
Вища, з 2008 по 2013 (5 років)

Додаткова освіта та сертифікати

certificate: Ergonomics in production

2014

Bronze Lean six sigma

2016, 6 месяцев

Silver Lean Six Sigma

2016-2017

Знання і навички

• MS Access
• Agile
• AutoCAD
• MS Excel
• KOMPAS-3D
• MS Office
• MS Outlook
• MS PowerPoint
• CAD
• SketchUp
• MS Word

Знання мов

• Українська — вільно
• Угорська — початковий
• Німецька — початковий
• Англійська — вільно