Oleg

Hardware developer

Place of residence:Kyiv
Ready: Distance, Other countries, Kiev
Portfolio : www.istacon.pp.ua

Work experience

1. Hardware developer

from 04.2019 to present time

Istacon Ltd, Kyiv (Automated systems and devices on order)

Development and production of information - measuring and control systems to order (R&D,
for GMBH W o T) for industry (chemical, food, paper) and trade.

1. Automated Oil Well Recovery System (AGIC)
2. Automated oil well monitoring and control system (LoRa, radio channel)
3. RFID detection system in a “smart store”
4. Multi-channel automated weighing system for video recognition and payment for products (refrigerator, store), electronics‚ electrical equipment, optics, mechanics, SW, HW (Linux, IDE Arduino, Visual Studio).
5. Profile meters analyzers laser "Sapphire", laser vibrometer analyzers "Rapier".
6. Instrumentation and SW for diagnostics and monitoring in the oil, agricultural industry ( IoT), industrial automation
Desktop PC, Android applications - DELPHI 7, XE 10.3, Visual Studio (C, C++)
Embedded HW - ESP32, ESP8266, AVR, MCS51, MSP430, 8086, Scenix, Raspberry Pi 3.4, STM 32, Altera CPLD, ADC, DAC, OAMP and others
Sensors - temperature, pressure, tenso, laser rangefinders, ultrasonic, accelerometers and others
Interfaces - SPI, I2C, CAN, RS 485, Ethernet, Mod Bus, USB, BT. Lo Ra WAN, RF, RFID and others
Embedded SW - Arduino, Keil, ASM , C, AHDL (CPLD\FPGA , MAX-II plus )
Circuitry and PCB – LTSpice, Work Bench Electronic, Splan 7, Layout 6, Easy EDA
Design - ACAD, Visio
They are used to create systems for accounting for finished products, energy resources, monitoring of technological parameters, automated control systems for weighing and packaging, distance and vibration measuring instruments, industrial process control systems (TIA Portal, Code Sys, SCADA, PLC)

2. Head of Industrial Automation Department

from 08.2016 to 04.2019 (2 days 8 months)

Agrovet Atlantic GK, Kyiv (agro-industrial complex)

Management of automated process control systems of the group of companies. Implementation of a feed and premix plant under construction, management of: an implementation team, development and contractors, development of concepts for micro dosing systems and portable milk collector sites, software, SCADA ( ZENON, In SAT), PLC ICPDAS, OWEN, Siemens, Honey Well, Klinkmann, mini PC RASBERRY Pi3 (Lazarus, Code Sys 3.5.,2.3 ,Isa Graf 6).

Development and the introduction of automated 3G remote process monitoring systems for pig farms, automated control systems for RFID animal monitoring, automated control of a pig farm (RFID, weighing, MATRIX, 1C), automated process control systems for weighing and animal recognition.

3. Head of Automation Department

from 08.2006 to 08.2016 (10 years)

LLC IT Integrator, Kyiv (System integrator)

Head of the Automation Department, Leading Development Engineer – development technical and commercial proposals, functional and fundamental decisions, supervision of design and installation, programming, commissioning of systems Automation (BMS, automation and dispatching of engineering systems of buildings and structures, Data processing centers, Industrial automation, Energy metering, monitoring systems). Microcontroller software (x51, AVR), DELPHI, development of HMI and algorithms, user interfaces, SCADA and software for automatic control systems of machines and automatic control systems. Software and HW development PLC, and SCADA. Code sys 3.5, 2.3

4. Head of R&D laboratory

from 01.2000 to 01.2003 (3rd year)

LLC «Sensor-Slavutich», Slavutich (Instrument making and process control systems)

Development and manufacture of systems, instrumentations, information-measuring and control systems for industry (electricity, energy accounting, thermometry, weight measurement, finished product accounting systems, loading and transportation line control systems, etc. ) - programming, electronic components, controllers and systems, vibrometric equipment (laser non-contact vibrometers analyzers, level sensors, frequencies, FFT, DSP), software and hardware complex of the laser vibrometer-analyzer "Optovibr".

Development of electrical circuit diagrams and software for embedded devices based on modern electronic components (Analog Devices, Maxim, Atmel, Altera, Sony, Sxenics). Microprocessor tools (KEIL, C, IAR WB, LtSpice), Delphi, (DDE, OPC, HMI, server software and desktops works place) for information-measuring systems and process control systems.

5. Control system engineer

from 01.1997 to 01.1998 (1 year )

Research and production association "MAGR", Chernihiv (engineering woodworking)

Process control system for woodworking machines, instrumentation and control, electrical equipment (tape sawing machines, saw welding control system, sharpening machines, automated opto - electronic system for regulating the modes of the welding machine.

6. Head of R&D Department

from 10.1996 to 01.2000 (3 years 3 months)

laser instrumentation plant Abris, Slavutych (Laser Instrumentation)

Head of the department of advanced developments of the enterprise of laser instrumentation “ABRIS”, Slavutich. R&D (digital signal processing, pattern recognition), management of the design bureau, development team and mock-up area.

Development of concepts, programming, development and manufacturing of single samples of radio- electronic devices and laser radiation control systems, measuring opto-electronic systems, power supply units for KG (TT). Acousto-optic deflectors and modulators, 50 MHz power amplifiers, matching devices. Laser software and hardware systems (Microscopes, projectors, engraving machines, optical radiation power controllers ,laser positioning systems ). Delphi, Visual Studio for creating software and hardware applications for laser microscopes and engraving machines.

7. Lead Engineer, Automation Developer

from 10.1995 to 07.1996 (9 months)

Ltd "Agropromtekhnika", Chernihiv (Development and production of technological lines)

Leading engineer for automation of technological processes and instrumentation, design, commissioning of automation systems for lines for the production of special containers and fine grinding of chalk in a gas-jet mill (Industrial automation, electric drive, PLC).

8. Electronics engineer

from 02.1995 to 12.1995 (10 months)

Ltd Priborormont (part-time), Chernihiv (Repair and maintenance of radio electronics)

Repair and operation of cash registers (MCS-51). repair of Radio electroncs and measuring instrumentation

9. Automation and instrumentation engineer

from 09.1994 to 10.1995 (1 year 1 month)

Experimental sportswear factory, Chernihiv (Commissioning of sportswear factory)

Management of the construction of an experimental sportswear factory in Chernigov, engineer of the 1st category for automation, installation and commissioning of computer-aided design, laser cutting and CAD systems and control and measurement systems.

10. Lead Engineer of Automation

from 05.1989 to 09.1994 (5 years 4 months)

Scientific and production association “Khimtekstilmash”, Chernihiv (Design and production of machines for the production of chemical fiber)

Engineer, Leading Engineer of the Laboratory of Microprocessor Means of the Automation and Electric Drive Department of the Institute of Mechanical Engineering of Chemical Fibers, R&D, systems engineering (microcircuitry and electrical equipment), top-level programming and PLC, embedded tools, system commissioning, technological process automation devices, single, special-purpose ( ACAD, PCAD, C, Orcad, ASSEMBLER).

11. Senior technician avionics

from 02.1987 to 04.1989 (2 years 2 months)

air defense aviation, Perm (regulations and repair of airborne electronic equipment)

Service in the air defense aviation of the regiment, senior technician, head of the group for the adjustment and repair of on-board radio-electronic radar equipment Creation of radar detection stands. Performing work in a related specialty - radio navigation and communications.

Education

Kharkov Aviation Institute

Radio engineering systems, Kharkiv, from 1981 to 1987 (5 years 5 months)
Higher Radio Engineering, Kharkov Aviation Institute in 1987 with honors. Qualification - radio engineer,
Specialty - radio-electronic devices of aircraft.
Specialization after education - development, manufacture and implementation of systems, devices, software for process control systems and special purposes.

Additional education

Courses at Kazan Radio Plant “620,623” - device, repair and operation (Nationality Identification Systems). (1988 1.5 months)
Courses at the Gorky aviation association "Sokol" (Antenna feeder devices, installation of products 620,623 on board) (1989 2 months)
Courses “Industrial controllers Remikont-110, 130, Lomikont-100” (1990 0.5 months)
Courses “Microprocessor control systems” KhAI (1991 2 months)
Courses "Electronic cash registers Repair and Operation" ELECTRONMASH (1994 0.5 months)
Incomplete postgraduate studies at the Institute of Electrodynamics of the National Academy of Sciences of Ukraine, "Information and measuring systems" (1995 1997)
Honey Well courses - software and PLC systems for automation of engineering systems of buildings (Care, SCADA EBI, LON). (2006 2 weeks)
Courses SBT SIEMENS, PLC Desigo-PX , SoftWare Desigo-XWORKS for developers and engineers (2007 2 weeks)
Courses SBT SIEMENS, SCADA Citec, SoftWare Desigo-INSIGHT for developers and engineers (2007, 2 weeks)
Business Simulation of professional services training (2008, 2 days)
Software and Hardware Honey Well, Centra line for BMS (2010, 2 days)
Phoniex Contact dispatching and monitoring tools (2014, 1 day)
Code Sys 2.3 OWEN (2015, 2 days)
INCOM Software and Hardware for Hotel Automation (2015, 2 days)

Professionals skills

Embedded systems developer and HW skills

Computer knowledge - to the extent necessary to carry out work on the design of electronic and electrical, radio- electronic equipment, programming of microprocessor tools (IAR WB, KEIL (ASM, C), PCAD, Mat Lab, OrCAD, Work Bench, Lt Spice, Splan 7, layout 60, MAX II+, Ide Arduino .

Radio engineer developer (6 years of experience)
Developer of microprocessor tools (8 years of experience)
Programmer DELPHI, HMI, Works place (6 years of experience)
Programmer EMBEDDED (7 years to come)
System integrator (8 years to reach)
Engineer-developer of process control system (19 years of service)
Electronics Operations Engineer (Advanced, over 4 years)
Head of the R&D Department (10 years of experience)
Head of the Automation process laboratory (9 years of experience)
Private Entrepreneur (9 years of experience)
Automation or Embedded programmer (10 years of reaching)

Language skills

English - Intermediate

Additional information
The largest projects implemented at enterprises from 1989-2022 -
Process control system for factory poultry
Smart Store (Weights + EI) HW
Smart Refrigerator (Weights + EI) HW
IoT for oil wells
Generator of special signals for resuscitation of oil wells
Automated control system for texturing machine Automated control system for carbon fiber
Automated control system for "Doffer" unloader robot

Technological intelligent panel (x51)
Power supply unit with MP control for lasers - BPND-2000
Optical power regulator for acousto-optic deflector
Laser positioning system AIIST-1
Process control system for the grain locking shop at the Desna beer plant in Chernihiv (PLC B&R CAN network, IBM PC, Delphi, SCADA)

Information-measuring microclimate systems (3 models), electrical accounting at Production Association
Khimvolokno, Chernihiv - IISE "Microclimate", IISE "Electro-accounting" 2000-2004.
Modernization of the measuring complex "Raduga-2M" - determination of the color of the product ( caprolactam crumb )
Software controller for replacing "Volmeter" produced by "ANID" of the polycon densation line (software and hardware complex on the IBM platform, firmware, Delphi)
System "Pneumotransport" - ACS based on an industrial computer (development, programming, manufacturing and implementation, Delphi, Altera)
System of technical monitoring and accounting of energy resources " Boiler " at Production Association "Khimvolokno" 2003 (development and implementation of microprocessor hardware (x51) and Delphi software at the energy complex, algorithm for calculating heat consumption, mass of steam, gas, water).
Laser profilometer "SAPPHIRE" for KFTB Koryukovka (rewarded with the prize of the magazine "EKiS" in 2004, development of the year) - electromechanical,.
Laser vibrometer-analyzer "Optovibr" for nuclear power plants.
ACS for accounting for finished products at OAO Khimvolokno (development and implementation of microprocessor hardware and software for the packaging shop)
ACS "Zarya" at Production Association "RITM" Chernihiv (Workstation of weighers)
Accounting system for finished products at OJSC Desna (Conveyor Accounting) Automated weighing and accounting system "Avtoves" at OJSC Khimvolokno
Systems for monitoring technological parameters based on industrial technologies. controllers Sh-711, R-130.
Optical laser micrometer of diameter MKD-2005
Systems of dispatching and automation BMS of administrative and residential buildings (UAR Boryspil, UAR Lvov, DPC FOZZI, ROSHEN)
Automation tools used in the development and implementation - 1. Microprocessor
tools: Keil-7.0, C ++, x51, SiLabs, Altera, AD, Maxim, IDE IAR 2.VU programming: Delphi, VC++6
PLC: B&R, Hitachi, OWEN, Klinkmann, IBMPC platform, Lomicont, IEEC 61131, Siemens, Desigo-XWORKS and Desigo-Insight, Siemens TIA Portal
Scada: EBI, Trace Mode-6, WIN CC, Zenon
Linux platform, DOS, W-XP,2000, ME,10
More information.
Driving license - category B
Foreign language - English (reading foreign technical literature, correspondence, programming)

Publications

"Automation in industry" 200610 art. "Information-measuring system of the energy complex" Moscow
EKIS 2004/2 "Laser profilometer - analyzer "Sapphire"" Kyiv (awarded with the prize of the year)
"Energy and Computer", No. 3, 2003, "Vibration Measuring Devices and Control Systems"
Equipment and tools No. 2 (49) 2004, "Profilometer "Sapphire"
Patent for utility model No. 561 (6 G01B90) "Node for receiving the radiation of a laser measuring device reflected from the surface of the measured object" (Ukraine)
Patent RU (11)13922(Russia) "Laser measuring device"
Certificate No. 13922 (Russia) "Laser measuring device"
Patent for industrial design "Laser non-contact meter of vibration parameters on the surface and rotating shafts " Optovibr "
Certificate PA No. 2331 "Program for automated accounting and storage of power consumption parameters in industrial premises"
Certificate PA No. 2330 "Program for multi-channel automated control and accounting of energy consumption in real time"
Certificate PA No. 2332 "Program for automated accounting and storage of microclimate parameters in industrial premises"
Certificate PA No. 2151 "Program for digital signal processing of a microprocessor laser system for non-contact measurement of parameters