Максим

Summary from February 28, 2024
Maksym Anatolyevich Zhiba
Design engineer, thermal power engineer, UAH 30,000
Full-time employment or remote work.
Age: 44 years
City: Dnipro
Contact information
Address: Dnipro
Phone: [відкрити контакти](див. вище в блоці «контактна інформація»)
Email e-mail: [відкрити контакти](див. вище в блоці «контактна інформація»)
Work experience

Revit, Autocad tutor
from 09.2022 to now (1 year 5 months)
[відкрити контакти](див. вище в блоці «контактна інформація»), Dnipro (Construction, architecture, interior design)
Ensuring the process of learning to work in Revit and Autocad programs
Development of own CAD training methodology
Development of templates in the Revit program and implementation of working documentation of industrial objects to order.

Leading engineer, engineer of the 1st category
from 01.2020 onwards time (2 years 8 months)
STEM Engineering, Dnipro (Project services in metallurgy)
Verification of technical solutions for technological pipelines in the documentation of the BE, P, RD stages, preparation of tasks for the execution of drawings of the P, RD stages for metallurgical production facilities - sinter plant, converter shop, blast furnace shop.
Responsible for the design and technical solutions of gas treatment of blast furnace gas DP9.
Execution of drawings of pipelines of natural gas, compressed air and other gases for the compressor, DHW gas treatment, and blast furnace.
Performance of strength calculations in the START program for Du1600 converter gas pipelines and small pipelines.
Execution of 3D REVIT model and drawings of the compressor, nitrogen gas pipeline.
Editing and creating REVIT families
Energy engineer
from 07.2018 to 12.2019 (1 hour 5 months)
CEC, Dnipro (Designing of heat supply and ventilation systems, technological pipelines.)
1. Designing of the TC section, correction of the TC section at the P stage for the technological wastewater treatment plant of the metallurgical industry (8 floors, 25 pipeline systems).
2. Development at the P stage for the installation of industrial wastewater treatment of food production:
- placement of equipment, containers and tanks in the building and on the general plan,
- technological pipeline systems, implementation of pipeline drawings.
3. Implementation of engineering support for the construction of a food production workshop (approximately 500 units of basic equipment) (according to P&ID diagrams and equipment plans) - in a short time frame:
-Development according to P&ID diagrams of the basic diagrams of shop pipelines, blueprints, plans and sections.
- Issuance of specifications for cutting openings in ceilings and walls, as well as support structures for pipelines.
-Correction of technological equipment placement plans taking into account the changes introduced during installation.
-Operative development of solutions for laying pipelines in the conditions of current installation.
-Development of the layout of the pneumatic transport pipeline of the finished bulk product. Issuance of a task for the calculation of pneumatic transport.
4. Completion in REVIT of working documentation of the TM brand for the heat station, consisting of 6 circuits of heat supply and hot water, wiring of hot water boilers, heat and water input nodes.
Leading engineer of the energy group
from 06.2016 to 07.2018 (2 years 1 month)
LLC Lengypromez-Dnipro, Dnipropetrovsk (engineering of metallurgical plants)
Development of the P and RD stage of pipelines of combustible gases (LPG, KG, PG), compressed air, nitrogen, heat pipes, steam, oxygen, water:
Placement of completed and constructed on the general plan, selection and verification of equipment characteristics, search for suppliers and selection of equipment, development of principle and blueprints of pipeline installations and overpasses, drawing of pipelines in 2D in AUTOCAD.
Calculations of strength, hydraulics, thermal insulation in programs Start, Hydrosystem, compilation of calculation tables in Excel.
Issuing tasks to other departments and organizations, checking construction drawings and coordinating decisions. Preparation of volumes for drawing up estimates, correspondence with customers and suppliers, participation in meetings, author's supervision of construction - business trips.
Practical experience in calculating and designing boiler rooms, external heat supply networks, and smoke tracts.
Development of the TM section at the stage of OTR, feasibility study for the complex of continuous casting of steel, including:
- argon, oxygen gasification installations,
-oxygen-regulatory point
- compressor with receivers
- gas distribution point
- intra-shop and inter-shop networks of energy carriers, energy bridge.
Development of TM, TC, GS sections at the P stage for a biogas power plant with a capacity of 4.8 MW.
Leading engineer of the heat engineering department
from 07.2002 to 06.2016 (13 years 11 months)
State Enterprise Ukrgypromez, Dnipro (Engineering of metallurgical production facilities)
Development of the P and RD stage of pipelines of combustible gases (LPG, KG, PG, Propane-Butane), compressed air, nitrogen, steam, oxygen, water, heat pipes:
Placement of built and constructed on the general plan, sketching on site, selection of drawings in the archives, execution of drawings from photographs, search for suppliers and selection of equipment, layout and compilation of principle and plan diagrams of pipeline installations and overpasses, 2D drawing of pipelines in AUTOCAD, strength calculations, hydraulics , thermal insulation in Start, Hydrosystem programs. Acquaintance with Revit-Map, COMPAS.
Issuing tasks to other departments and organizations, checking construction drawings and coordinating decisions. Preparation of volumes for drawing up estimates, correspondence with customers and suppliers, participation in meetings, author's supervision of construction - business trips. Practical experience in calculating and designing boiler rooms, external heat supply networks, and smoke tracts. Development of the TM section at the stage of OTR, feasibility study for the complex of continuous casting of steel, including: - argon, oxygen gasification installations, -oxygen-regulatory point - compressor with receivers - gas distribution point - intra-shop and inter-shop networks of energy carriers, energy bridge. Development of TM, TC, GS sections at the P stage for a biogas power plant with a capacity of 4.8 MW. Leading engineer of the heat engineering department from 07.2002 to 06.2016 (13 years 11 months) State Enterprise Ukrgypromez, Dnipro (Engineering of metallurgical production facilities) Development of the P and RD stage of pipelines of combustible gases (LPG, KG, PG, Propane-Butane), compressed air, nitrogen, steam, oxygen, water, heat pipes: Placement of built and constructed on the general plan, sketching on site, selection of drawings in the archives, execution of drawings from photographs, search for suppliers and selection of equipment, layout and compilation of principle and plan diagrams of pipeline installations and overpasses, 2D drawing of pipelines in AUTOCAD, strength calculations, hydraulics , thermal insulation in Start, Hydrosystem programs. Acquaintance with Revit-Map, COMPAS. Issuance of construction and other assignments to other departments and organizations, inspection of construction drawings and linking of decisions. Preparation of volumes for drawing up estimates, correspondence with customers and suppliers, participation in meetings, author supervision of construction - business trips II category engineer from 12.2001 to 07.2002 (7 months) Research Institute "Proektrekonstruktionsiya", Dnipro (Design of reconstructed buildings and structures) Design of gas pipelines of a reconstructed boiler house, external gas pipelines. Production engineer from 07.2001 to 10.2001 (3 months) NPP "Energotech", Dnipro (Design and construction of boiler houses) Design and installation of boiler rooms Education NMetAU Metallurgical f.-Promyshlennaya Teploenergetika i Energosberezhenie-96, Dnipropetrovsk Higher education, from 1996 to 2001 (4 years 9 months) Thermal power studies the processes of generating and transforming heat into mechanical and other types of energy, which is used in industry, metallurgy, all types of energy, transport, utilities. Additional education • Occupational safety courses for safe performance of work at height (altitude climbing) with insurance. SE DNAK "MONOLIT". (2018, 2 weeks) • AutoCAD 2008 Three-dimensional modeling - Computer Academy "SHAG" (2008, 2 weeks) • Course Autodesk "Navisworcs Manage Level 1" (2010, 3 weeks (33-40 teaching hours).) Professional and other skills • Computer skills Professional 2D drawing, in AutoCAD, Experience of 3D drawing in Revit 4 months, there are completed projects. familiar with 3D drawing in Compass, I perform pipeline calculations: for hydraulics-Hydrosystem, Excel, for strength-Start Designing calculation formulas, tables and graphs in Excel Work with scanned documents in PDF format Working with space photos and maps in SAS-Planet, Work in Word, Total Commander, Outlook. • Documentation of TM, GS, TS brands at the stages of feasibility study, research and development, P, R (10 years of experience) Advanced, currently using. • Water certificate of category B, received on 04.2018, minimum experience (1 hour of experience) Beginner, 1 hour ago. • Advanced, currently using. Knowledge of languages • English ─ below average Ukrainian ─ freely • Russian ─ fluent
Additional information
I am engaged in sports, sports tourism. I don't smoke, I don't drink strong alcohol. Committed to traditional family values.