Eduard

Eduard Lysenko
EXPERIENCE
January 2024 - Current
Wind Turbine Service Technician Vestas | Estonia
• Maintenance, repair and troubleshooting of the wind turbines
• Inspected, maintained and repaired wind turbine components in
accordance with safety procedures.
• Conducted routine checks on mechanical parts such as gears, brakes,
bearings and blades.
Tallinn, 784 43401
• Troubleshot technical issues using specialized diagnostic tools and
[відкрити контакти](див. вище в блоці «контактна інформація») equipment.
• Performed preventative maintenance on electrical systems including
[відкрити контакти](див. вище в блоці «контактна інформація») wiring, controls, sensors and generators.
https://www.linkedin.com • Installed new control systems to improve efficiency of turbines.
/in/eduard-lysenko-755a71298/ • Performed regular lubrication of machinery to ensure optimal operation.
• Responded quickly to emergency repairs when needed.
Bold Profile
• Maintained detailed records of work performed for each turbine.
• Analyzed data from SCADA systems to identify anomalies or potential
problems with turbines.
• Monitored voltage levels in order to optimize power output from turbines.
SUMMARY • Replaced faulty electrical components such as switches, fuses and circuit
Resourceful Wind Turbine Technician breakers.
known for high productivity and • Operated a variety of hand-held power tools in order to perform repairs.
efficient task completion. Specialize • Inspected all safety features before starting any repair job.
in preventative maintenance, fault • Ensured that all safety protocols were followed during maintenance
diagnosis, and emergency repairs. activities.
Skilled in technical troubleshooting, • Provided technical support for other technicians when needed.
electrical systems, and mechanical • Communicated effectively with supervisors regarding progress of tasks
repair. Excel in problem-solving, assigned.
teamwork, and adaptability to ensure • Checked electrical components of wind systems with voltage testers,
peak operational performance of multimeters, oscilloscopes, infrared testers and other devices to ensure
wind turbines. equipment worked correctly.
• Repaired various systems by restoring electrical, mechanical and
hydraulic functions.
• Followed safety protocols, regulations and codes to reduce hazards and
SKILLS risks to personnel and equipment.
• Diagnosed issues with control systems and generators to identify faults
• Responsible, hardworking, and
and manage efficient repairs.
quickly trained
• Assessed and corrected maintenance, installation, production, quality and
• Team player, focused on results
design concerns.
• Confident PC user (Windows XP,
Vista, 7, Linux)
• MS Office (Excel, Word, Outlook, April 2023 - December 2023
Access) Smart Meter Installer TLI Group | Limerick, Ireland
• Internet (Opera, Internet Explorer,
Mozilla Firefox), and e-mail • Installation of smart meters and their commissioning on private
(Outlook Express) properties
• Text and image editors (Word, • Performed installation, maintenance, and repairs of electric meters in
Worded, PowerPoint, Access, Paint, residential and commercial locations.
Excel, AutoCAD, Compass 3D, • Analyzed data from electric meters to verify accuracy and identify
 SolidWorks, Photoshop)
• Confident office equipment user potential problems or irregularities.
(fax, MFP, PBX) • Inspected wiring connections in existing meter systems to ensure proper
• Actively involved in sports operation.
• Safety protocol adherence • Repaired faulty wiring and replaced defective parts within the meter
• Wind turbine equipment system.
• Power generation • Provided technical support and advice to customers regarding their
• Turbine troubleshooting electric meters.
• Electrical testing • Utilized hand tools such as wrenches, screwdrivers, pliers, soldering irons
• Wind turbines during repair operations.
• Wind turbine commissioning • Tested voltage levels throughout the system using a variety of
• Fiber optic sensing instruments such as ammeters, voltmeters.
• Renewable energy • Followed established safety protocols while working with hazardous
• Pneumatic tool operation materials such as high voltage electricity sources.
• Vibration analysis • Used equipment, techniques and tools for task completion.
• Alternative energy • Supported activities to maintain equipment in reliable condition.
• Assessed meters for cracks and other issues, repairing problems on spot
and testing repairs for proper functionality.
• Reported hazardous or unreadable meters to supervisor to resolve issues.
• Drove vehicles safely, obeying traffic laws and transportation procedures
to avoid accidents.

October 2021 - March 2023
Electromechanical Engineer Sampler Hydrotech | London, England

• Able to create new design, providing benefits and/or solving problems.
• Follow-up, check, and challenge suppliers' progress.
• Assemble and test controller prototypes, and perform modifications..
• Evaluated electrical systems, products, components, and applications by
applying knowledge of electricity and materials.
• Analyzed customer needs and provided technical solutions to meet those
requirements.
• Provided technical support and troubleshooting for electrical issues,
minimizing downtime and enhancing system functionality.
• Managed electrical project timelines and budgets, ensuring projects were
completed on schedule and within financial constraints.
• Implemented preventive maintenance programs to enhance system
reliability and longevity.
• Utilized and interpreted technical drawings when repairing and installing
electrical systems.
• Trained and guided new employees according to company standards and
procedures.
• Created manuals and instructions regarding operation of electrical
equipment and systems.
• Developed preventive maintenance plans for machinery used in the
production of electromechanical components.
• Worked closely with other departments such as quality assurance,
purchasing and sales teams.
• Created drawings and specifications for electromechanical components,
assemblies and subsystems.
• Evaluated existing electro-mechanical designs to identify areas of
improvement.
• Investigated new technologies related to the development of
electromechanical systems.
• Assisted with problem solving in regards to product design or
manufacturing processes.
• Provided troubleshooting and analysis for discovered electrical faults,
 offering potential solutions.
• Inspected finished products to ensure compliance with engineering
standards.

June 2020 - September 2021
Commissioning and Testing Engineer Zaporizhzhya nuclear power station |
Energodar, Ukraine
• Ensuring the fulfillment of tasks and functions assigned to the engineer
for N/ and Technological protections and interlocks in accordance with
the requirements of the Regulations on the Technological protections and
interlocks site.
• Implementation of management of employees of the enterprise,
temporarily subordinate to perform a specific commissioning work or
service.
• Production and verification of installation and basic electrical drawings of
Technological protections and interlocks, correct documentation based on
the results of verification, prepare data for the development of initial data
for the project of reconstruction of individual NPP or TPP systems,
small-scale energy facilities, and industrial enterprises, provide reports on
the results of the verification of drawings to the work manager.
• Reviewed software requirements and developed test plans, strategies, and
scenarios to ensure all requirements are met.
• Executed manual tests and generated comprehensive test results for
review by stakeholders.
• Monitored application functionality during system upgrades to ensure
proper operation after upgrade completion.
• Analyzed system logs for errors or anomalies that could indicate a
problem with the application under test.
• Assisted in troubleshooting customer problems reported through support
tickets or other channels.
• Implemented best practices for software testing such as continuous
integration and code coverage analysis.
• Ensured compliance with applicable laws when developing or deploying
new products or features.
• Created test data for validating scenarios based on functional
requirements.
• Compiled evidence such as photographs and measurements and produced
thorough reports detailing results.
• Characterized physical and chemical properties of starting materials,
intermediate reactions and final products.

March 2019 - March 2020
Electrical Installer Harju Elekter | Keila, Estonia
• Assembling transformer substations, assembling control panels, assisting
engineers in drafting and changes to the design of substation equipment
• Conducted tests to ensure proper functioning of installed systems.
• Installed and repaired electrical systems, wiring, fixtures, and
components of industrial machinery and equipment following technical
diagrams.
• Connected power cables to transformers and circuit breakers according to
established procedures.
• Performed preventive maintenance tasks on electrical equipment as
required by company policies.
• Installed conduit supports, brackets and hangers to hold conduit in place.
• Assembled junction boxes, breaker boxes, fuse boxes and other electrical
enclosures.
• Terminated cables into terminal blocks according to manufacturer's
instructions.
• Checked continuity of circuits using ohmmeters or other testing devices.
• Inspected electrical components to identify hazards, defects, or potential
repairs in compliance with codes.
• Used power construction equipment, measuring devices and testing
equipment to complete electrical installations.
• Trained workers to install, maintain and repair electrical equipment and
fixtures.
• Supervised apprentices and assessed completed tasks, offering guidance
and encouragement.
• Advised management on issues of safety in continued equipment
operation.

August 2018 - January 2019
Winding Stacker for Electrical Machines Winding development | Vaasa,
Finland
• Operated heavy machinery to stack and move products within the
warehouse.
• Maintained safe working environment by adhering to safety protocols and
procedures.
• Monitored warehouse operations, ensuring that all tasks were completed
efficiently and safely.
• Performed regular maintenance checks on all material handling
equipment used in the facility.
• Reported any damages or discrepancies in product quantity or quality to
the supervisor immediately upon discovery.
• Maintained organized work area to boost efficiency and minimize
misplaced items.
• Identified opportunities to improve processes and efficiency and
addressed with supervisor.
• Carried necessary tools and supplies to transportation vehicles and
returned to proper storage areas after use.

July 2017 - July 2018
Electrician, Mechanic LTH BAAS | Wismar, Germany

• Performed electrical installations, maintenance and repairs of electrical
systems, wiring, fixtures and components.
• Tested continuity of circuits with testing devices such as ohmmeters,
voltmeters and ammeters.
• Inspected electrical equipment and systems to identify hazards, defects
and the need for adjustment or repair.
• Connected wires to circuit breakers, transformers or other components.
• Maintained current electrician's license or identification card to meet
governmental regulations.
• Identified problems with electrical systems by observing operation,
listening for problems and using test equipment such as multi-
meters.Installed grounding system per NEC code requirements.
• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers and transformers.
• Installed cables, conductors and wire trays and completed necessary
hook-ups for primary power lines.
• Tested entire electrical assembly for performance levels and safety
concerns.
• Placed and installed safety systems and set up emergency lighting,
uninterruptible power systems and battery systems.
• Collaborated with architects on electrical systems design for new
construction.
• Interpreted drawings and schematics to pinpoint sources of mechanical
issues.
• Planned work procedures using charts, technical manuals and experience.

May 2016 - June 2017
Electrician, Installer TOR ELEVATOR | Moscow, Russia
• Installation of elevators and elevator equipment, tuning, testing,
commissioning, technical maintenance, repair, electrical equipment
company (OTIS).
• Performed electrical installations, maintenance and repairs of electrical
systems, wiring, fixtures and components.
• Tested continuity of circuits with testing devices such as ohmmeters,
voltmeters and ammeters.
• Maintained current electrician's license or identification card to meet
governmental regulations.

March 2015 - April 2016
Electrician IBT | Moscow, Russia

• Construction and maintenance of the TPMK S 218 tunnel complex,
maintenance of a high-voltage substation, installation of a lighting
network, installation of lighting transformers, and installation of mining
complex equipment.
• Performed electrical installations, maintenance and repairs of electrical
systems, wiring, fixtures and components.
• Inspected electrical equipment and systems to identify hazards, defects
and the need for adjustment or repair.
• Ensured that all work was completed in accordance with applicable codes.
• Followed safety procedures when working on energized circuits; observed
lockout and tagout requirements when servicing equipment.
• Diagnosed malfunctioning systems using schematics diagrams and test
instruments such as digital multimeters.
• Diagnosed issues in electrical circuits and equipment and took proper
corrective or preventive measures for repair.

January 2014 - February 2015
Underground Electrician ZZRK | Zaporozhye, Ukraine
• Installation and maintenance of mine elevators and equipment associated
with them in the mine, including the mechanical part.
• Working with AC motors, I am familiar with the principles of operation:
asynchronous-thyristor cascade, squirrel-cage motor, and phase rotor. I
have also worked with automation, sensors, limit switches, and other
automation equipment.
• Installed, maintained, and repaired underground electrical cables,
conduits, and related equipment.
 • Performed preventive maintenance on underground electrical systems
including cleaning of contacts, connectors, terminals.
• Monitored the operation of all underground electrical systems including
alarms and safety devices.
• Repaired damaged control panels by replacing defective parts or rewiring
circuits as necessary.
• Inspected electrical components and cabling.
• Maintained electrical prints and documentation.
• Checked regional regulations while designing building electrical systems
and drafting blueprints to maintain adherence to required codes.
• Completed resagging on older or improperly installed lines.
• Performed pre-installation procedures to attach cross-arms, insulators
and auxiliary equipment to poles.

EDUCATION
February 2024
Master degree | Electrical engineering and electromechanics
Dmytro Motornyi Tavria State Agrotechnological University, Melitopol

July 2013
Technical School | Operation And Repair of Mining Electromechanical
Equipment And Automatic Devices
Dneprorudnensky Industrial Technical School, Dneprorudnoe

CERTIFICATIONS
• Category B driving license
• Electrical safety approval group: 5 th group up to 1000 Volt and above
(regional)
• Safe pass
• Manual handling
• Working in heights
• License to operate Forklift
• Hot works permit

PASSPORTVALIDUNTIL
10/25/27

LANGUAGES
high, medium, fluent, native, beginner

REGISTRATIONOFRESIDENCE
Ukraine, Zaporozhye
PERSONAL INFORMATION
• Citizenship: Ukraine
• Number of Children: 0
• Date of Birth: 06/26/93
• Marital Status: single

LANGUAGES
Ukrainian: First Language
English: B2 Russian: C1

Upper Intermediate (B2) Advanced (C1)
Polish: B1 German: A1
Intermediate (B1) Beginner

REFERENCES
References available upon request.