Андрій

ANDRII HLADII
MANUFACTURING PROCESS ENGINEER,
QUALITY ENGINEER
Process Engineer / Researcher by qualification, formerly worked as an
engineer at the Department of Analytical Chemistry, with over ten years of
experience in the production of construction products.
Until 2020, I worked as a process engineer in linoleum manufacturing. I
gained skills in managing the technological processes of the mixing department,
including the production of plastisols (transparent, colored, filled with inorganic
mineral substances, and foamed) and water-based photopolymer systems. I
CONTACT acquired experience in monitoring intermediate processes such as calendering
and coloring, as well as the technological processes involved in producing final
construction products.
During my work as a quality engineer in the R&D department, I expanded
Kalush | Ivano-Frankivsk, my technological expertise with skills in controlling the quality of raw materials
Ukraine and finished products. I also gained experience in the full laboratory cycle of
testing new construction products and related construction materials, including
[відкрити контакти](див. вище в блоці «контактна інформація») products with enhanced fire-resistant properties.
Since 2022, I have been working as a plant process engineer in lamella
[відкрити контакти](див. вище в блоці «контактна інформація») production within the woodworking industry, where I expanded my previous
experience and achieved concrete results: implemented World Class
Manufacturing (WCM) principles, digitized the wood planing production processes
and the equipment monitoring system, increased production line productivity by
EDUCATION 15%, and ensured safety, uninterrupted production, and product quality.
About me: I strive to deeply analyze processes and find effective solutions.
I enjoy exploring and “digging deep” into technological processes to improve
production results.
Ph.D. in Manufacturing
Process of Organic Synthesis WORK EXPERIENCE
Products Plant process engineer of lamella
DEC 2012-DEC 2015 production (Technological
department)
MAR 2022 - PRESENT
LPNU - Ukraine Tarkett-Vinisin, Kalush - Ukraine

• Improvement of KPIs for wood planing and subsequent lamella cutting
processes (safety, productivity, quality).
Master’s in Chemical • Development of technological standards and work instructions (SOP,
Technologies of Organic OPL).
• Planning and monitoring of equipment maintenance (Q|P components)
Substances
• Verification of availability and ordering of spare parts for woodworking
“Technological engineer, equipment.
• Digitalization and optimization of technological processes in the
research engineer woodworking industry.
qualification” • Testing of new cutting tools and development of new products.

JAN 2011 – NOV 2012 Quality-engineer of linoleum
LPNU – Ukraine production (R&D department) DEC 2019 – FEB 2022
Tarkett-Vinisin, Kalush - Ukraine

• Monitoring visual, consumer, and technical parameters of finished
Bachelor’s in Chemical products.
• Conducting laboratory and pilot-scale tests, including raw material
technology
analysis: sieve analysis, viscosity measurement, moisture content
SEP 2007 – JUN 2011 determination, tensile testing, stiffness testing, water absorption
testing, surface microstructure analysis under a microscope, fire
LPNU – Ukraine performance testing and related tests.
• Preparing daily and monthly quality reports for finished products.
• Validating product characteristics during the New Product
Development (NPD) process.
 Engineer-technologist of linoleum
SOFT SKILLS production (Technological
department)
SEP 2016 – NOW 2019
Team work Tarkett-Vinisin, Kalush - Ukraine
Critical thinking • Control and standardization of intermediate processes in linoleum
production, including calendering, mixing, and coloring.
Decision making • Organization of the mixing department operations according to
production targets.
• Control and validation of technological processes during testing of trial
formulations.
HARD SKILLS
Trainee-technologist
Process control PrJSC Enzym Company, Lviv - Ukraine
JUN 2016 – AUG 2016

Quality control • Monitoring the technological process of dry yeast production in a
fluidized (pseudo-boiling) layer.
4D, 8D, PDCA, FI (OPL, QK, SOP) • Determination of water content in the final product.
• Maintaining equipment cleaning schedule in compliance with HACCP.
Project Management
Engineer of analytical chemistry
Data analysis department JAN 2016 – MAY 2016
LPNU, Lviv - Ukraine
Presentation creation
• Development of technology for the production of polycarboxylates based
Fast typing on hydroxy(poly)alkyleneoxy(meth)acrylates as concrete additives, as
well as systems for the demulsification of oil–water emulsions.
• Projects supporting the Scientific and Production Company “Halychyna”
(Drohobych) under an economic contract.
LANGUAGES • Defense of a PhD (Candidate of Sciences) dissertation
(https://old.lpnu.ua/research/disscoun/d-3505207/gladiy-andriy-
English – B2 igorovych).

Polish - A2

Ukraine – Native

Russian – Free ARCHIEVEMENTS
“SCROEDER’S PLANING LINE DIGITIZATION”
DRIVING LICENCE PROJECT
2023 year
The line’s OEE was increased on 15%
B1, B, C1, C categories The economy of the project – 7 k€/year

“LINOLEUM SCRAP RECYCLING” PROJECT
RECOMMENDATIONS Responsible for Omnisport products properties 2020-2022
validation that contains part of the “Omnisport’s years
Roman Pukish Scrap” in foam layer
“Tarkett-Vinisin” General
Director “THE NON-QUALITY LACQUER REMAINDERS
[відкрити контакти](див. вище в блоці «контактна інформація») RESTORATION” PROJECT
The reuse method of bad-quality lacquer remainders 2019-2020
[відкрити контакти](див. вище в блоці «контактна інформація») by restoring them was developed and standardized years
for linoleum production.
Taras Shmygelskiy The economy of the project – 15 k€
“Tarkett-Vinisin” Wood
Production Director
[відкрити контакти](див. вище в блоці «контактна інформація»)
[відкрити контакти](див. вище в блоці «контактна інформація»)